New Profile Posts

  1. copperhead
    copperhead Talonfcc566
    Got my whole nike stripped down, spending money on all the mechanical stuff I hadn't planned to right now..but I'd rather do it all at once. Bars will have to wait. Will be interested in what you come up with on the box. Jury rigging is a hobby of mine..lol
  2. copperhead
    copperhead Talonfcc566
    Having problems trying to message you will try send another later later.
    On the airbox, how about taking a good sized ID fuel filter and using the nipple off that. Then you could carve out the base of the airbox part to make a seat for the the nipple to sit and epoxy it in. Permabond makes a good plastic epoxy. Just tossing it out there.
    1. Talonfcc566
      Talonfcc566
      My apologize copperhead. I didn't see the messages. Wife has been out of town and my responsibility increased. Like your idea of cutting off a tube form something else.
      May 15, 2019
    2. Talonfcc566
      Talonfcc566
      Just reading your clutch bent arm string. Amazing how one thing leads to the next. I agree to check thinks now rather then later.
      May 15, 2019
    3. Talonfcc566
      Talonfcc566
      I replaced my throttle cable tonight and installed air box. I was surprised the lower tube goes back up into frame. Didn't think much about until I installed it.
      May 15, 2019
  3. Talonfcc566
    Talonfcc566 copperhead
    Copperhead,
    I paid $10 for the airbox and want to make it work since it's an 79 airbox.
    I thought about finding the same type plastic tube and epoxy it on, maybe with a small reinforcement tube in the inside. Once it's together I won't be removing it.
    Thanks for the ideas.
    What ever happen on the handle bars? You were right that there is some small difference from mine. Still very close.
    Shawn
  4. RickyRacer
    RickyRacer kirrbby
    Hey Kirrbby - Sorry to bother, but I wanted some wisdom from a fellow Honda lover and I see your Buddha and figured... THIS is the guy with wisdom and knowledge! Running into some financial issues.. where would you price my 1991 CT70 with 540 original miles.. and it IS like new.... ANY response and guidance - much appreciated... Thanks- Rick in PA
  5. WENDELL OLDHAM
    WENDELL OLDHAM
    Got a 72 ct70. When I hit the brakes, either foot or handle bar the tail light goes out. I made sure I have a 6v bulb. Help!!
  6. WENDELL OLDHAM
  7. Talonfcc566
    Talonfcc566
    AMC crazy is what I am ..
  8. Grifter
    Grifter
    Hi. I’m fitting a big bore 88cc cylinder to my CT70. I’ve now had a thought, do I need to upgrade my carb to one for a 90cc bike?
  9. Steve j
    Steve j
    Richmond VA
  10. Steve j
    Steve j
    From RICHMOND VA
  11. Donald_50
    Donald_50 racerx
    Hello Bob...
    "Racer X"
    How do I "Call" or get in touch with "TJR-Germany regarding a "Honda N.I.C.E.
    Engine?
    Do I go through you??

    Cheers, Donald
  12. placek59
    placek59 kawahonda
    How much would you want for the K0 bars if you decide to sell them? Are they really nice? Let me know please
    Thanks,
    Keith
  13. JRivera
    JRivera
    Have a honda grom big bore kit. Wondering about this oil coming out a little bit. Should I use a catch can?
  14. Donald_50
    Donald_50 racerx
    I was unaware that I can Only post 420 characterises?!?
  15. Donald_50
    Donald_50 racerx
    2014 Grom Ohlins front end with 12 inch Tyres & Wheels & Disc Brakes!

    YES...I am open for "Suggestions/Corrections"!?!

    Cheers, Donald
    P.S. (Finally, a few of Jamie...HymieP parts will be put too work)!
  16. Donald_50
    Donald_50 racerx
    What about "Ported & Polished Head"? Bigger valves? And which cam?
    I believe I wanna make "Horsepower"... I believe $2750.00 to $4,250.00 (U.S. Dollars)!
    I am 5ft. 10inches...200lbs.
    Cruise & Commuter bike...
    I have 12inch Grom Tyres & Wheels...
    "G'Craft Aluminum Swing Arm (+2cm)!
    "Ohlins...Macho Rear Shocks...Disc Brakes...for the Rear!
  17. Donald_50
    Donald_50 racerx
    Hello RacerX,
    I finally got some money together...
    I would like too purchase a "Honda NICE 110"...
    I believe I would like to go with a "154cc" (I believe I read that is what you have)?!?

    Do I go On-Line with PJR out of Germany?
    I like the side cover with the "Mini Oil Filter"!
    And on the other side...I want the "65 Amp Stator" that is offered
  18. Mike_
    Mike_
    Please make me an offer.
  19. Mike_
    Mike_
    Hi Roy! Not boarded out just redid stock. New pistpoin rings, valves and springs, Gears, shifter, cam chain and a few more things,
  20. Roy Chambers
    Roy Chambers Mike_
    About how much are you looking for on the Engine ? Was it Bored out or just re ringed.
    And what State would it be coming from ? incase I can drive and pick up?
    Thanks Roy.