New Profile Posts

  1. zfleming
    zfleming
    New project bike
  2. spencer2986
    spencer2986 Gary hughes
    Welcome to the forum. Where you located by chance?
  3. Adam26
    Adam26 racerx
    Hey racerx
    I got a 2003 Rupp Scrambler trail 90 and I need some parts for it.
    I think I read somewhere you had collected some parts or bikes maybe from that time ? Any chance you can help me ?

    Adam.
  4. Mazdafish
    Mazdafish
    New to the site, and finishing my first CT70 build
  5. airblazer
    airblazer Enginedoctor
    Are you back in Park City for the winter?
  6. Diceman9
    Diceman9 b52bombardier1
    I see that you had some advise on rebuilding the forks on a ST90. I am about to start the rebuild. I have the seals. I've never done this before. Do you happen to have something with instruction to do the rebuild? Thanks in advance.....Kent
  7. twebb10
    twebb10
    1971 Honda CT70H2006 Ducati Multistrada 1000s DS, 1978 Vespa P125X
  8. Itzmemunchie
    Itzmemunchie
    ISO 1981 CT70 top bridge
  9. Dakotaborn
    Dakotaborn darrel gunderson
    I have build a few motorcycle motors and some two stroke scooter motors. This is my first small Honda motor build. Like all other builds, my advice is take your time and look for good documentation
    1. darrel gunderson
      darrel gunderson
      I build and have built CT70 and Z50 engines now for about 12 years. I have done about 100 or so including alot of 108 builds.
      Aug 20, 2018
  10. jason Bernardeau
    jason Bernardeau darrel gunderson
    Hi my name Jason, I was wondering if you are rebuilding ct70 motors still. I'm getting ready to do mine, and read some post about some of the motors you have done. I'm looking at 88cc kit. So if you can help please let me know.

    Thanks
    Jason
    Jasonbernardeau@yahoo.com
    510 673-4059
    1. Drew likes this.
  11. Atvtrailrider
  12. Drew
    Drew
    1970 CT-70 with Piranha 140 engine with oil cooler and performance exhaust,with mx bars.
  13. ArcticMinibike
    ArcticMinibike kirrbby
    Is it normal for a condenser to have continuity from the outside case to the center pole when installed and the points are closed? Mine is new but maybe I overheated it? With both coils and the points wire installed, I get continuity from the condenser case to the center of it.
    1. kirrbby
      kirrbby
      Yes it is. When the points close, it connects the points wire, that goes to the condenser, to ground.
      May 23, 2018
      ArcticMinibike likes this.
    2. ArcticMinibike
      ArcticMinibike
      Thanks! You've been very helpful through this 2-year project! In a panic for an event this weekend (can’t take chances) I ordered an entire stator rebuild kit. Expensive, and likely unnecessary, but the wiring on my coils and harness pigtail were in very rough shape. Multiple bare wire spots. Likely repairable but for $45, an acceptable piece of mind. Sad thing, I now have a spare condenser, points....and coils. :)
      May 23, 2018
  14. Cleato904
    Cleato904 SketchyBikes
    Good deal, I couldn't find one at the shop.
    1. SketchyBikes likes this.
    2. SketchyBikes
      SketchyBikes
      Thanks for checking! I'm on the hunt for a 1980 main wiring harness also. That seems to be much harder. All the after market ones stop at 1979.
      May 23, 2018
  15. Cleato904
    Cleato904 SketchyBikes
    I'll look at the shop on Monday and let you know if I have them. I'll see what else the slide n needle fits.
    1. SketchyBikes
      SketchyBikes
      Hey I just saw this now. Sorry! I ended picking up a new needle and slide from dratv. Got it the other day. Thanks though!!
      May 22, 2018
  16. Jlloyd
    Jlloyd
    New to the site, but I've been lurking since I made my childhood dream come true about two weeks ago.
    1. kirrbby likes this.
  17. kirrbby
    kirrbby Corbin Larson
    Welcome Corbin. I sent you a PM. Please start a thread so we can have a place for discussion about your new bikes.
  18. Corbin Larson
    Corbin Larson
    I just got 2 1974honda ct70s and was wondering where or how to check/fill transmition fluid
  19. DasCT70
    DasCT70
    I just became the owner of a 1974 CT70, and have begun restoration. I can’t wait to pick everyone’s brain. Pics and updates to follow...
  20. DasCT70
    DasCT70
    Thanks for accepting me.