Just Pulled The Trigger --> 2015 Honda CMX250 !!!

Adam-NLV

Well-Known Member
WELL? Don't change the subject...
It a class 'C' License only, cars vans light Trucks. And I can Tow a 10K pound vehicle. I'm pretty sure the lady at Dmv would have reminded me I already have a motorcycle License on there ! :LOL:

I knew it wasn't on there.;) What do you think i am? A Fart Knocker?:LOL::Dlol
 
Last edited:

OLD CT

Well-Known Member
Mine is class D on the front but the back has the endorsement M- Motorcycle.

Pretty sure she doesn't give a F. Make them do a history search!
 

Adam-NLV

Well-Known Member
Mine is class D on the front but the back has the endorsement M- Motorcycle.

Pretty sure she doesn't give a F. Make them do a history search!
Good Idea!(y) They should be able to do that. I will look for one of my old Cal DL's it prob has the M on it. Maybe I can show it to em' if i can find one.
 

Adam-NLV

Well-Known Member
Took a chance and bought this used Corbin seat for my cmx250 Rebel. The stock seat is a 'bobber' style and is a saddle seat in actuality with the back part separate, its not a true saddle seat.
The new Corbin seats is about $500 by the time it gets in your hands, got this one used for half the Price. :) The seat pan is fiberglass and the cover is Leather. i want to treat it for protection but i don't want to slip off it either!:cautious: What can you use on Leather that protects but not slippery?

Gonna wait for a decent day to instal the crash bar & the Corbin Seat. Right now there is a huge wind & cold and a bit on the apocalyptic side...:ninja:


100_0220.JPG

100_0223.JPG
100_0216.JPG 100_0226.JPG
Where the hell is the Mojave desert Heat?!:whistle: Moj Desert heat will kill corona!:alien:
 
Last edited:

Adam-NLV

Well-Known Member
Here's the stock Rebel seat its a 2 piece, uncofortable on the back part. New seat is one piece. i like this bike's Cycle-stand front tire holder, cool.(y)

04.jpg
 

69ST

Well-Known Member
I would think that Xymol leather treatment/conditioner would be good. Application directions are to apply it to clean leather then park the vehicle in full sun, allowing the heat to bake it in. Works well with a black leather interior of a black car and without the dreaded ArmorAll ice skating effect.
 

OLD CT

Well-Known Member
I pulled the trigger and bought a La Pera seat for my ride also. It is a better value than a Corbin and is just as nice or better. It's called the ''Daytona'' seat. It looks and feels awesome. Great back support! Kind of a must with forward controls! I prefer the smooth look without extra stitching and
IMG_0299.jpg
buttons, my original seat had the pillow top look with buttons.
I use Griot's Garage Leather care, BTW.
 

Adam-NLV

Well-Known Member
Griot's Garage Leather care
Thanks for the product recommends, Leather is different than the vinyl seats that i'm used to.
Btw, that 'Daytona' seat fits & looks great. And Hell yeah lower Back support is a big plus not usually found with the stocker seats.(y)
 
Last edited:

69ST

Well-Known Member
Griot's Garage offers quality products. FYI, some are manufactured by Xymol (as well as other outfits). The leather treatment may the same product with different labeling. You're not going to go wrong, with either, for sure.
 

Adam-NLV

Well-Known Member
Went ahead and installed these amber L.ED light bar. they're 12V flexible, 3M adhesive and can be used for blinkers and running lights(y) It will increase the bike's Night time driving signature.
They also have the Red option too if you like getting pulled over by the cops.:geek::LOL:

100_0235.JPG
100_0237.JPG 100_0243.JPG 100_0244.JPG
100_0249.JPG
 

Adam-NLV

Well-Known Member
Do they sell the flashing red/blue combo? :rolleyes:
I'm sure you can find that set-up but i'm not trying to be a Nevada Highway patrol on a cmx250! :p

But....I got these single bright blue Led lights that i use as front walkway lights for my low voltage garden lighting system i'm installing.. I'm still working on them' but i use old empty pot jars for the fixtures! :ROFLMAO: 100_0177.JPG


100_0254.JPG I attached the low-voltage transformer to the brick wall but under the eve.I bought this for my old house, it was too nice for that place, did not instal it!
Probably would of got ripped off. Lol! :D:eek: :poop:
 
Last edited:

Adam-NLV

Well-Known Member
X2 on that(y)
Looks like it could pull out a stuck Locomotive! ;) I don't see a radiator... Are they air-cooled?
 
Last edited:

OLD CT

Well-Known Member
Thx guys, yes it's air cooled. Low amount of cars on the road with the Covid.:sick: More OPEN ROAD space for me to hammer down.:LOL: It's the perfect time to ride, err 'go to the store';) in Bergen Co pushing 60 degrees out and running some 110 octane leaded 50/50 mix tonight.:)
 
Top