Recent content by acool55

where the original vin tags stamped from the back side with the vin number not printed like the one posted? If there were stamped is there anyone who can do this for the correct look. Thanks don

Iam finishing up my 73 restore and need a new exhaust pipe, who sells the most correct pipe for this bike I dont need the chrome parts. I see a lot of reproduction stuff on ebay not sure if any are good.would take a used one if i could find a good solid pipe, Thanks Don

working on my k2 restoration project after setting it a side for few years, the question is what runs thru the oblong holes on the inside of the handle bars, is it the front brake and throttle cables?? Its been apart to long to remember and iam not getting any younger...:39:

Are there any rubber grommets that go in the two large holes in the back of the headlight bucket. Thanks Don

I am working on a 73 k2, did all these bike come from the factory with front and rear turn signals, I have the crome headlight ears but no holes in them for the turn signals, it has a switch on the handle bar with l/r and the horn button. the bike was complete when i bought it. Thanks Don

pm sent

private message sent.

Looking for a 73 ct70 k2 tailight housing assy, Dont need the bracket just a complete assy that the lens bolts to.good chrome would be a plus. drop me a email at acool55@stny.rr.com. Thanks Don

I did some digging and found the factory exhaust pipe from the bike, had to do some welding but it looks good now, the question is what are you using to paint the black color on the pipe, would stove or grill paint be close to the correct color? Thanks

Called the local honda dealer today and was told the part is no longer availible thru honda..

Hello everyone, I have been off the board for sometime, its time to finish my 73 project, Iam looking for the factory Exhaust pipe. I have all the chrome parts, any ideas where to find one? a good used one would work, new is also ok, any opions on the aftermark stuff out there for sale. Thanks Don

Hello Everyone, some of you may remember me, Iam building a topaz orange 73 ct70, I have not posted in awhile as I have been trying to get the motor rebuild done and its also car show season, well anyway Iam back to work on the ct70 and my question is how do the front foot peg springs go in? do...

Glad its back, missed this site..:)

scooter, Yes he would not do them because one needs work, it has 3 dents that need to removed, his words to me were( I have been in the business for 25 years and there is no way to get the dents out) I asked about a cone or something to place inside the ear to help with dent removal, it was a no...

Ok, I live in upstate ny, took the parts to a small family owned shop, The only one around by area, I took the headlight ears(he would not even consider them so there are not in the price),so the price is for a skid-plate, rear fender, taillight bracket, exhaust guard(long section only) and a...