Separate names with a comma.
[ATTACH]
Using a speed calculator that I have here, the results I found are below, and based upon the numbers you provided above. The top box is a dropdown...
Absolutely, I've got more running time on it the last two weeks than I have in the last 2 years...
All of the above modifications heartily contribute to the overall speed, but Old CT forgot to include a pic of the street that he lives on, it has...
Appears to be unique to the CA200, as seen HERE. Click on the part #1 Honda part number and you'll see it's the only model listed.
I might be wrong, but I think the piston is upside down, the arrow should be pointing down, and the dimple is clearance for the spark plug tip, no?
The two studs on the right side of the case must be installed before you install the dowels, which are 8x12. The two other dowels are 8x14 and go...
Sounds good... [ATTACH]
Very nice ride, well done! Good luck with the Z build..
I must be getting old, I didn't pick up ANY indication that you're a retired auto body painter looking at your username... ...the term scooter...
I believe it takes 42 - 21 on top and 21 on the bottom
I believe the stock carb is 13mm and shown below [ATTACH]
That's an aftermarket carb and manifold, and probably way too big for the stock 50cc displacement. It looks to be a PZ19 at the least, might even...
If you will, post up a few pics of the manifold and carb you have on it presently.
Just an FYI, if the intake manifold carb mounting holes on the carb you have are wider than 35mm center-to-center, a stock manifold won't work;...
