Ok guys here's what we've got so far.
Removing the indicator bulb from the dash ALMOST did the trick.
With that bulb removed,
and the turn signal switch on left,
only left turn signals come on.
Same thing for switch on right turn .
So left side gets left lights only,
right side gets right lights only.
But still no flashing on either side.
Battery and generator checks out fine.
Engine not running, Battery reading is 6.49v.
Engine running, battery is 9.5v
Next, I took a voltage reading at the flasher terminal, with the engine running, and turn signal switch on, is 8.49v
So it would seem that voltages and wiring checks out fine.
Looking at this electronic flasher, it does not have any identifying markings as to voltage. Only the terminal markings L and B.
The box does have some markings, but does not say what voltage it is.
I'm thinking it MIGHT (maybe ?), be a 12v flasher ? ? ?
Is that possible ?
Ill try and attach a pic of the box markings.
Removing the indicator bulb from the dash ALMOST did the trick.
With that bulb removed,
and the turn signal switch on left,
only left turn signals come on.
Same thing for switch on right turn .
So left side gets left lights only,
right side gets right lights only.
But still no flashing on either side.
Battery and generator checks out fine.
Engine not running, Battery reading is 6.49v.
Engine running, battery is 9.5v
Next, I took a voltage reading at the flasher terminal, with the engine running, and turn signal switch on, is 8.49v
So it would seem that voltages and wiring checks out fine.
Looking at this electronic flasher, it does not have any identifying markings as to voltage. Only the terminal markings L and B.
The box does have some markings, but does not say what voltage it is.
I'm thinking it MIGHT (maybe ?), be a 12v flasher ? ? ?
Is that possible ?
Ill try and attach a pic of the box markings.
Last edited: