Search results

  1. D

    Parts list for 1970 ct70 valve job

    Thank you folks. Will tear it down it brother mechanic and give this a try
  2. D

    Parts list for 1970 ct70 valve job

    Thank you!No we didn't just piston and rings. We've had pretty good luck with several ct90 "smokers" having a complete valve job done. Since I bought this from original owner and done a full restore just wanted to get rid of smoking issue. Just wasn't sure of part numbers
  3. D

    Parts list for 1970 ct70 valve job

    Have restored 1970 ct70. Cylinder bore .025 and new piston and rings. Starts and runs great but smokes. What parts do I need to have a complete valve job done??
  4. D

    Tensioner spring for 1970 ct70

    Received the wrong tensioner spring from CHP however the Cam cover that came in from them appears to have cleared up the cam chain rattle si we were able to take it for its first ride. Ran great.. thanks for everyone's input!!
  5. D

    Tensioner spring for 1970 ct70

    Thanks!! Going to do a little more investigating based on this feedback. The 1970 K0 does in fact have only one spring. I found and ordered a new one from CHP and a cam cover. I bought the bike from the original owner and have all the maintenance records. It had been in his basement for the...
  6. D

    Tensioner spring for 1970 ct70

    My brother and I (mostly him) just finished a complete rebuild of a 1970 k0. It started on the second kick but sounds like the new timing chain is rattling. We shut it off tried stretching the spring and still have the same noise. Looking for the correct new tentioning spring and cover but...
  7. D

    Too much crap

    Looking for front fork sliders for 1970 K0. Mine are bent. Consider the whole fork if it's easier but was able to find most parts. Also I have one bent rim that needs replacing. I will be sand blasting and powder coating but like decent shape. Thank you be glad to call if it's easier.
Top