Separate names with a comma.
First I know only the Moderator will see this, but I've decided it really is boring working on CT's as the Bible of CT's says they HAVE to stock,...
I have a Lifan 125cc that I bought new on Amazon in 2014 for $210 even with the carb, manifold, harness, angled air filter, and everything else. I...
Funny. Being a Musician I really get along great with other Musicians, even if their favorite Genre is different than mine. Here if you bring up...
I know this isn't the right forum, but this is totally relevant here because this is where I get the most help by racerx because Technical is...
Since my '70 CT70KO was running much too rich so adjusted the Carb Slide Clip one increment and now it's way too lean. Can't get that chocolate...
Can someone supply a link to buy a good 'inexpensive' Compression tester for my '70 CT? I was looking at them all over the Internet and I was...
Searched the threads for advice on a good battery recommendation. No luck as the threads are like 7 years old and all links aren't valid. Searched...
From the start the stator on my Lifan 125cc 4-Speed worked off and on. Sometimes it'd be about 14 volts and sometimes less than 5 volts so I know...
Does anyone know how much a 1970 CT70KO weighs? I've search a ton on the internet and can't find out anywhere.
My '70 CT70KO runs pretty great, but sounds like it's really winding out at 32mph? I'm thinking one of the previous owners wanted to do some...
[ATTACH] So I'm rebuilding my carb and as usual I put EVERY loose part in a baggie so I don't lose anything, the bolt is in the baggie but the...
Last time I cleaned my CT70's Carb I found an aftermarket airfilter in a box of parts. I duct taped it to the carb's boot. Seems I'm constantly...
My CT70 has fallen a few times because of this so now I'm really careful. Something must be bent as the angle looks wrong. It seems too far back...
I bought a new carb and throttle cable from CHP for my '70 CT70KO because it was tough starting with my last carb (which was generic also). Now it...
This looks to be a good price for this bike. They say all electrics work and it starts 1st or 2nd kick everytime, and runs and shifts just fine,...
Never Mind. Found another Thread (no pun intended) which actually suggested what I was thinking. Of course it was RacerX. What would we do without...
On a '70 CT70KO are the gaskets for the carb side and head side intake manifold the same. I left the gasket and spacer bolted to the carb side but...
Do the footpegs go under the skid plate or above? I know this is a stupid question, but I had a heck of a time reinstalling them yesterday. Btw, I...
I was checking out what parts were on sale on CHP Motorsports and noticed these. I thought they were pretty cool so I bought one, and some other...
I know there are threads concerning this, and You Tube videos with step by step instructions with timing chain procedure, and even how to drill a...
