Search results

  1. Chrisj796

    It’s getting old

    I got both 70’s going, one had a bowl of green but will only run with choke on an the other just needed a boost of carb cleaner to get going. The 50 which I just rode last week, isn’t doing squat. I give up for today but I will for sure give the different fuel a try. Where would I find that in...
  2. Chrisj796

    It’s getting old

    Does anyone else have to battle with their bikes every time they let them sit for awhile? My Jeeps sit for months one for years and fire up first try but all three of my bikes I feel are a battle to get running every time I want to cruise them around. When I park them I shut off fuel an let them...
  3. Chrisj796

    I’m Back!!!

    Just a few more odds and ends an it’s done but started up after third kick an runs great, thanks for the help an resources, sure I will be back again when I find another one.
  4. 0633B574-C27D-43A7-BF5A-27DDA157CA1B.jpeg

    0633B574-C27D-43A7-BF5A-27DDA157CA1B.jpeg

  5. Chrisj796

    Z50 soft tail luggage rack

    This was in box of parts I got with my 69, it looked highly modified or home made though
  6. Chrisj796

    FOR SALE CT70 Carburetor

    I need a headlamp light assembly, license plate bracket, what do you have?
  7. Chrisj796

    Z50 parts

    K1 Z50A Looking for a decent shape Chain guard Muffler stinger Top nut/race for steering stem Tail light Headlight Hoping some members that restored bikes have some salvageable parts they saved an want to sell.
  8. Chrisj796

    Z50A ignition coil

    it came off a 71 so I would have to agree, I guess for the price I got a good spark plug cap I will see if it’s better shape than the one on my in-laws k2.
  9. Chrisj796

    Z50A ignition coil

    Top one was on 69 z50a just bought bottom they look similar but last 3 numbers are different anyone know the meaning behind this? All part numbers I find don’t give the numbers stamped on coil is bottom off a later model z50?
  10. Chrisj796

    Too much crap

    https://www.tbparts.com/product/tb-handlebar-set-ct70-k0-others/
  11. Chrisj796

    FOR SALE CT70 Carburetor

    Used CHP CT70 K0-77 Carburetor $45 or the right Z50A part
  12. Chrisj796

    I’m Back!!!

    Going to take rims, engine covers and tank to paint. Then plan to straighten steering stop out an clean up a weld someone did on the forks lower brace. Anyone have a decent taillight bracket or exhaust stinger they want to part with?
  13. Chrisj796

    I’m Back!!!

    Got most of the parts done with first round of polishing. Figure I will shine up everything but the handle bar mount. Also got a seat with a pan in pretty good shape last night just have to keep an eye out for some handle bars, exhaust stinger an a headlight now. Going to try to get the silver...
  14. 9A32BA38-9770-4E07-9092-91FD61B0A360.jpeg

    9A32BA38-9770-4E07-9092-91FD61B0A360.jpeg

  15. Chrisj796

    Carburetor Parts 68-71

    I looked an didn’t see any an his site says don’t contact them lol. It’s just a brass barb so I guess I can mic the I.D of the hole an start searching for a similar looking one.
  16. Chrisj796

    Carburetor Parts 68-71

    Does anyone know of a replacement barb for the drain hose in bottom of bowl? Mine is missing the barb for the drain hose, also the mesh inlet screen. I still have the ring but the mesh has been removed by someone. I figured somebody might know of some interchangeable parts?
  17. Chrisj796

    69 z50 part hunt

    I will be waiting lol
  18. Chrisj796

    69 z50 part hunt

    Got a 69 z50a that PO stripped to repaint/rebuild an lost quite a few parts hoping to find some on here. Have a spare engine if anyone is looking or wanting to do some trades case vin is 173500 At the moment I need to track down: handle bar holder Front & rear hub an brake assembly Tail light...
  19. Chrisj796

    I’m Back!!!

    I just googled NFG lol, I guess i will be pulling that engine apart again glad I didn’t tighten anything external on case.
  20. Chrisj796

    I’m Back!!!

    Yes looks like PO could not figure out how to get bolt off an attempted to drill or use homemade tool? I guess I will have to swap crank out with spare motor does it look correct? Key was in flywheel when I disassembled engine.
Top