Search results

Got this a few years back from Arizona and never used it, fork tubes appear to be in very usable condition and included is a kit from ebay with new springs, seals, dust boots, cheapy chrome plastic trim and plastic sliders for the springs. I also have new from chp 1977 specific axel, castle nut...

I have what turns out to be an apparent 1969 silver tag engine that was donated to me from a Facebook bike purchase a while back. Serial is CT70E-107557 Engine is mostly complete I have the head, cylinder jug and lower end minus the flywheel cover. It was sitting assembled but without a...

I have a parts engine I would like to put on ebay it has the serial CT70E-107557 would that make it a very early KO engine? cant seem to find a page I once had saved that showed engine serials next to the years they were produced. Thanks for any help.

3 speed parts engine that is partially disassembled it had sand above the piston was left outside most of the parts are there for it but it needs to be torn down completely to make sure its all good. If you need pictures of anything specific just ask I will get pictures just give me a little...

this is my stroker kit up for sale brand new never used any parts still in the box from tbparts decided to not do a build up on my engine. PM me if you want it, ill take it off ebay and do free shipping for a member on here. Make sure to confirm this kit will work on your bike this is for the...

Well what do I do now... Got the old 4 speed to start up for the first time since the previous owner parked it many years ago. But they had bent the old bolt where the exhaust mounts up and decided to weld it back onto the nut that holds the shock on. It wasn't very straight and the exhaust...

Looking for good/decent condition top plate and handle bar mount for my 1977 front end, does not need the handle bar "knobs" I have a new set already. Pm me price and pictures and we can work something out. Thanks, John.

just saw this on ebay. http://www.ebay.com/itm/RARE-Scrambler-Horse-monkey-bike-for-restore-/162492226455?hash=item25d54a9b97:g:qLAAAOSw5UZY9kJc&vxp=mtr looked cool so i googled it, not much info except for this really weird 90's website a guy made about his restoration of one...

dont like the look of the stock ko grips feel like they would suck after an hour or two. Can i use regular motorcycle grips?

Looking to buy Hitachi flywheel and stator for the 4 speed crank. Flywheel must be in working order not covered in rust with the mechanical advance. This is backup in case my Mitsubishi stator is fried which is very likely. Willing to buy separate if you don't have both. The stator I...

I have the parts at home to do it but then i have seen and heard from a couple people saying they have only had the cdi kit from xrarespares on ebay work for 3speed models. Just wanna see if anyone has got it to work on the mitsubishi style 4 speed. Since my whole build is revolving around this...

Alright so my bike 1970 ct70h was purchased as is without title and id like to make it legal at some point in the near future. Has anyone successfully titled a ct70 that they bought without a title? I looked into this, and Vermont only titles vehicles out to 15 years and doesnt even title...

Does anyone know what sprocket combo works good with the tb108cc kit on a 4 speed? I'm looking to keep good low end torque for trail rides/climbing hills but want to be able to ride on street if i need, not looking to race but at least get around 50 mph if that's possible without the engine...

EDITED: Going with tb108cc stroker kit now... --------------------------------------------------------------------------- Made my mind up :35:on getting a piranha (yx) 140 from tboltusa in a couple weeks and using that for trail rides and street riding on my 1970hko project. Basically I...

Looking to replace my 1970 hko rear shocks with something better for off road use and some light road use. I weigh 165lbs. Looking at lots of them online its hard to tell what's the best and if any of them are more than just a spring on a rod. Already acquired a 77 front fork assembly and...

Aftermarket coil. Are the aftermarket coils for ct70 any good?

Currently mid restomod on a 1970 ct70h what do i need to check on before i even attempt to start it so that i do not harm anything on the bike? Probably been sitting a few years, i wouldnt be surprised if engine needs rebuild but holding onto hope that it wont yet. carb is already being...

What does hitachi stator mean I'm new to the bikes and have a 1970 ct70H 4speed and I'm pretty sure I saw the mitsubishi stamp on the stator area and have seen parts for mainly hitachi. What is the difference if any? And biggest question if parts are not available can i convert to hitachi? I'm...

Hello all, new to the forum here and bikes as well, recently picked up a 1970 emerald green ct70h in mostly original condition. Needs a restoration and I'm going either resto-mod or eventual complete restore. first thing I wanna do is get it running. the carb is currently off so it can be...