Search results

Thanks Kirrbby, didn't see it when I had looked originally, on order and hopefully arriving soon .

Discovered my speedo isn't working on this 93 I picked up this spring, the cable end was rusted in the sheath and the wheel end is gone, is there an aftermarket option for these or only OEM , I did manage to look up the correct replacement part no online but looking for a cheaper option than the...

Happy to report that the carb kit worked well, everything went together well, float and needle was a little confusing as it didn't need the little wire retainer that the original float used, got everything buttoned up and it still didn't run, pulled the plug and checked spark as I had added a...

Kit ordered from said vender, I like the fact that everything is there in one purchase , float needle ect, it even has the little "W" shaped clip for the needle, I lost one once and it stalled my project by a few days, on the vintage car I have there is an oddball clip that is a bitch to install...

I saw that kit and was thinking about getting it, I am getting a list put together of what I am going to order

I did find an old tread about someone having good luck with an aftermarket carb , ebay seller was still active but not selling that exact carb anymore, I am going to pull the drain screw and make sure carb is getting gas for sure, hopefully this week, I should stop buying projects and start...

New to me 1993 ct70, Haven't had much time to investigate it yet, the guy I got it from had changed the carb to a different one not sure of the brand, I have the original one that I would like to rebuild and put back on there, but I'm unsure what kit to buy and what supplier, some dealers only...

looking for a nice condition tail light / license plate bracket for a 73 ST90 , anything out there , would need shipping to Wisconsin, TIA

Very cool info and definitely a bonus for me if I ever tag and ride this thing on the street, most of the work is done for me as far as adding turn signals, First Ill see if it runs and get some other details worked out. thanks for the info

recently bought a couple of ct70's . one a 72 parts bike and a 73 that is fairly complete, was poking around on the 73, pulled and cleaned the tank and the carb, going to see if I can get it to fire, I noticed that it appears to have a main harness that has the pigtails for the rear signals and...

Just to follow up on this issue, I ordered a 7 mm tap off of fleabay only to find I couldn't source the 7mm bolt locally, went to option 2 and ended up putting a helicoil in it, bought the setup online and it went easy, was worried about the little breakaway tang at the end being hard to...

thinking now, these bolts are fairly short, wonder if this hole is threaded deeper than what the bolt is reaching and if going to a longer bolt would catch the threads that are into the casting further, there is a boss that is bumped out from the fork so guessing the bolt could be at least...

this is the bolt for draining the fork oil, not the crankcase oil, the bolt threads in but doesn't tighten down

looked but could not find anything , I'm sure I'm not the first one to have this happen, what's the best way to deal with it, its a nice original bike and want to keep repair inconspicuous. thread repair or bigger bolt ?

Thought I would post an update for future reference, played with the choke a little while it was running and got no results from that, I ended up putting a carb kit in it and that helped somewhat, it would rev better and would idle down without killing, it would still stumble when it was WOT ...

I try to be self sufficient and figure these things out on my own but I am stumped, 1970 KO , 1616 miles, not sure if accurate. this is my first one of these bikes and might be my last as I'm getting frustrated, nothing similar in the tech section that I could find so here's my story, sorry in...

Do you have the mounting bases that go between the light bracket and the tool box bracket, the part with the ground wire on it ? I need a left and right pair.