Search results

From this months MotoChamp. also if you pick up a copy there is a add for the Desmo DOHC Takegawa head that has finally been released. April is always the best issues for some reason.

So here is the latest. I had to take a few weeks off from this to work on a big house project but that was finished up last Friday and i spent some time on the wheels this last weekend. I was able to lay up two halfs of one wheel and get them trimmed. They will need some finishing but they seem...

almost exact same setup as fatcaat on my Chlay which has the same fork and swingarm spacing.. my rear is a 4.0 rim. Pretty tight up front with the fender arms (some bending was needed) and i ended up running offset sprockets which with out the chain would have very little clearance. with out im...

So the headlight bucket came out decent. The molds had some pretty tight shapes in it so it was a bit challenging to lay the carbon in. Still need to do a good amount of wet sanding and make the ring mount tabs but i put it on the bike tonight to get a look at what it looks like.

The Pipe was done by a Belgium builder Len Bracke and he had a shop that he was working on setting up to sell parts on the web but i no longer can find any info on it so im not sure how far he got along. I know he had one of these pipes on his own bike and i believe he sold a few others to guys...

You know i dont even really know. The cases were from a frozen ZB50 engine i picked up off of ebay for next to nothing. I just wanted the stator and the cases. The trans is a used monkey AB27 4 speed i got out of japan for a few hundred. The head was a left over Honda NICE 110 head that i had...

That was the first run of the bike, however i have had that motor in my monkey at one point with different gearing and had it up to 65. no way ide be brave enough to take a ridged up to that speed nor is there the gearing for it. It did pull the front wheel up in third though which could be fun...

The bikes up and running at this point, finished most of the electrical and made my own harness from scratch here is the diagram i came up with. Last weekend was somewhat productive, it was nice that it was extended some as i was able to finish the CF electrical box, key switch mount and...

So let me know what you all think. Ive removed some of the billet pieces and I feel it goes with the overall look of the bike better. Also finished the fw mounting tabs for the tank, just need to get a longer fuel line now and strap it down. The bikes starting to get a lot of finger prints all...

Ok, so two long standing projects were finished this weekend. I got back to the Carbon Fiber hardtail tank, made the petcock mount that is bonded inside the tank, along with the front and back mounting tabs and bonded the two half's together. The tank is pretty much done at this point. Just need...

Ive never done the parade lap before at Laguna and I have to say it was pretty fun. Something to do at least once. Stegman was running his Go Pro and I had a friend up in the corkscrew with a still camera. Here is the link to the youtube. YouTube - Laguna Seca 2010 lap on the Monkey and...

Its a Takegawa 124+r, Daytona race ratio gear set on a monkey 4 speed, and a Daytona dry clutch. Carb is a Yoshimura MJN TM26.

yeah Bob, my buddy Greg was running a GoProHD. They are sure quite a bit better then the SD version that i have.

Its been posted on other forums but i thought ide put it up here. Turned out to be a quite scenic ride around San Francisco Saturday. We made a few stops around the golden gate for some pics and played a bit in city traffic. Not really the best spot for Monkey riding as you can tell from the...

Hand made from a builder in Belgium. Its also the tail light.

They are 8's. Thanks

95cc (54mm bore/stock stroke) built on ZB50 engine cases, with a ported NICE 110 head, AB27 honda 4 speed, and a lightened flywheel. The thing spins like a top. One of my favorite motors ive built.

Not yet.

Just a few update pics, the hardtail is damn near complete at this point. Just got a request form someone today to put up some pictures of it. So here they are. Had to drag it out of the man cave where i keep it.

Thats my daily rider these days. The hypermotard is a pretty fun bike.