Search results

I'm gonna put it up for sale....hate to, but trying to get all the college stuff together for Lindsay and we're going to simplify. Bike is unmolested and all stock. Candy Gold. Titled and running well. The one thing I was going to do was to work on the shifting issue. It's very intermittent...

out for a nice ride yesterday and i couldnt get the little 70 to shift from 1st to second. i stopped out it back in nutreal and let it warm up a bit. after a few minutes i took off and it shifted fine. coming to a stop sign, i downshifted stopped then took off...same thing. wouldn't shift into...

When i was rebuilding my carb I peeked down into the intake on the head and it was a little dirty...not too bad though. With that little fuel tank I wonder if I could put a little bit of Seafoam in the tank and have it just go through the carb into the head and eventually the cylinder for a...

As I look through the Dr.'s site...I'm not sure what all I'll need to get as I work on the front and rear brakes. Does someone have a complete list of things I should get to do the work..? Maybe even recommend other things while I'm in there..like new bearings, etc.. I want to try to have a...

On my carb(AT7B) after the rebuild..really more a clean up and use what I needed in the kit, the fuel shutoff valve is really hard to turn from off to on. Or for that matter to rotate at all. I replace the little black button and the funny wavy steel washer and tightened it all down. Now that...

ordered on the 12th the better carb rebuild kit from dratv...next day realized i needed a new float too, so i ordered that in a separate transaction since the rebuild kit was already closed and paid. today only the float shows up so i looked around a little in my email..seems i never received a...

The overflow needle, inside the bowl...isnt that supposed to be free flowing..? As i cleaned and blew out areas of the carb that needle or pin doesnt seem to flow. Maybe it's crud in it and I'll need to use a fine wire to free it..but wanted to make sure it's not a sophisticated miniture...

hey guys...I guess I gotta rebuild. Gas is leaking from the float bowl gaskets...and other places. I see several re-build kits out there. Which is the most recommended, which I'd hope would include appropreate jets and all the goodness. Thanks..

Havent riden in 2 weeks. went out tonight for a run around the neighborhood. Noticed that when I'd apply the brakes the brake light wasnt working, yet the lights were on as I was running. Tried the horn and it was weak then just quit working. So pulled in the garage turned it off and tried the...

Stopped by to see a friend the other day. He had his valkyrie in the driveway. Couldn't resist the photo op...

this has begun seeping gas from the tip...what is this..?

i have my skid plate off for some clean up. can i ride the K0 without it on? or does it provide necessary engine mount integrity..?

Not sure what this is called...but when riding down the road all of a sudden and very rarely there'll be a braking sensation followed by a jerky sensation. It's the drivetrain kinda stumbling for a sec...lasts for less than a moment (not sure what that is), but I wonder if it's the chain and...

While trying to replace all the old gaskets and adjust valves...the lower tappet cover nut has stripped. Now for the dumbass question...does the lower cover for-go the lefty loosey righty tighty method..? Maybe I'm thightening the damn thing... This afternoon, after work, I'll continue the...

The intake tappet cover came right off. Old o-ring was needing to be replaced...a little oil leaked out there. Exhaust one wasn't leaking but seemed like a good thing to replace too.. I noticed the nut was kinda rounded a little. As if someone had previously tried to get it off. I used several...

Getting ready to change out the chain and sprockets this weekend. As I'm getting ready...I looked over the job to ensure I had all the tools and stuff... I put the wrench on the 2 10mm contersprocket bolts making sure I've got the right size and I noticed the little sprocket kinda wobbles...

My little K0 is in need of a few things...its mostly all original. I ride it everday after work. Run around the neighborhood; down to the boat ramp; or to the beach...and basically it's running pretty good. Not very fast and stumbles a little bit when it gets hot, but other than that I'm really...

Is there a mag or other publications that folks know of? I've got several hobbies and have mags to look through that have ideas; tech tips; parts; etc... Kinda cool to have in the event your not at your PC and want to keep your passions close. I love this site and a few others, but would like...

I just got my Clymer for 50-110cc singles 1965-1999 singles and it really dosen't supply good info for removing the rear wheel and installing a new sprocket...I got the m310-13. I've seen a couple different versions with varying pictures. Mine has 2 z50's on the cover and 2 others with ct70's...

My pedal was not staying on very well, so I decided to get a new one. Went ahead and got a Honda one from dratv. Came in and I installed...noticed something kinda odd. As I'm pushing the bolt through the pilot hole to tighten down, it's hitting the kickstart shaft spline. As I turn it, it...