Search results

Have a 1972 ct70 wiring harness and installed turn signals. I have them wired up and they do work if hooked up directly to the battery. Is there a way to tie the wiring into the harness itself at a certain point. I was going to just buy a 1974 harness with all the connections in place already...

I have a 1972 harness in good condition. I added turn signals and now need the harness that has the added turn signal wires and relay/flasher. If anyone wants to swap, I would trade or if you have one laying around, let me know a price. Thanks!

Have a chance to pick up an early silvertag lower end. Would you put a premium on it being the 173rd one made? It’s priced decent but don’t want to overpay. Not sure what my plans would be but not often do you come across something so unique, possibly produced the first couple of days of the ct70.

Out of the thousands of miles I have put on ct70’s, never has one failed. I hear a slight squeak rising around yesterday and couldn’t pinpoint where it was coming from. Today I took the wheel off and noticed half of the speedo gear was striped while the other half was still good. Any reason for...

Had to fix the shifter star on the z50 and I messed something up along the way putting things back together. Before putting the clutch cover back on I made sure the transmission shifted fine, using the shifter. All checked out until I put everything back together and now it’s stuck in gear. The...

Have a 1970 Z50 that needed a few things. Nothing expensive just trying to get a small package deal done. Here’s what I need. Rear brake cable(the one that goes to handlebar) -Both Handle bar grips -Throttle cable and also complete throttle assembly -Carburetor slide, needle, needle clip and...

This came with a small lot of parts I bought a while back when I was doing a build. I do not have any use for it now. Was an expensive set-up but now may be more of a paper weight, hence the cheap price. Valve broke off causing the piston to smack the broken piece of valve into the head a few...

Was part of a project but no longer going to finish it. Great original paint. If interested send a message. Swing arm not included. $225 plus the ride.

Newly acquired 1971 HKO that has been repainted to the max, kinda ugly in a sorta cool way. Bought it to tinker around with during the COVID19 to surpass time. Closest numbers “match” I ever owned and was wondering if it is any more desirable or just something that is unique to the bike. Not...

Can’t recall exact years that will fit but I think it’s 1973-79...? Need the bracket and light. Doesn’t need to be perfect being it will be going on a rider but please nothing that is completely rusted out. Thanks!

Have a stock engine with come filter and a Keihin #62 main jet. Ran amazing all winter long and now with the weather change seems to be running rich. I asked all the local shops if they have a #60 main and zero luck. A couple places online have Chinese jets but really wanted to keep a good...

Finally done collecting parts for my build. Totally overlooked needing a chain guard if someone had one. Doesn’t need to be perfect but decent. Thanks!

I picked up a couple parts and had a set of K3 shocks but noticed the oil residue on the tubes so knew a rebuild was in store. After taking them apart I noticed tiny pitting spots on tube. How big of a problem is this going to be? Is there a “filler” or spray I can use to smooth the pitting so...

Haven’t had any luck finding something cheap that could use work. Everything is so rusted out up here, when a barn find comes out of the woodwork, it looks as in it was in the bottom of a lake for the last 20 years. Anyone have a ct70 roller or cheap project around Ohio? I have no problem...

Had a 4 speed on the shelf that I’m finally getting around to. I knew it had a shifting problem because the shifter would go up and down but not switch gears. So I took off the clutch cover to inspect and noticed the arm that catches the pins on the shifter star basically slides under the pins...

Has anyone painted just a section where there was some type of flaw in an area on the frame? I’m possibly buying a solid ct70 that has great paint except in one little section about 4 inches long by a half inch wide. Not looking for a perfect blend but just your experiences and any key preps.

For some reason the clutch “arm” on the outside case isn’t returning all the way down to disengage the clutch. It’s the “arm” that the clutch cable is attached to on the motor. It has the spring on it but I have to manually push down on it in first gear to get rolling then seems to get slightly...

Recently acquired 1972 ct70. Missing a few things and was hoping someone would have what I need for a package deal. I need an exhaust header, rear brake rod(including spring and nut) and brake light lense. Could use a nicer front fender and flywheel cover also but not necessarily important right...

I picked up a 1971 long fender a short while back to tinker around with until I found another ct70. I'm not very familiar with past sales of the z50's but from what I remember a few years ago, they were bringing decent coin. Now, it's no surprise to have an original nice runner for under a...

Title says all. Lmk thanks