Search results

Top end off a motor I bought off here 10 years ago. 20 minutes of run time in my possession. Takegawa 54mm high compression piston Matching Takegawa cylinder Head is a Honda CT70 setup, fully ported with an aggressive camshaft Heavy duty cam springs Valves were reconditioned, seats cleaned and...

Complete Honda Nice 110 Engine. Includes full Nice wiring harness/controls/CDI, Kitaco kick lever, shifter, Mikuni VM20 carb w/ K & N filter, clutch cable/perch/lever, oil temp dipstick (original also included), spare cylinder, and spare piston. Also throwing in a CT70 brake pedal that had been...

Looking for a used seat for a KO. Opposite of what most people are looking for or wanting in a project, I'm after a well worn specimen to match the patina of the rest of the bike. A cracked pan is ok as long as it isn't too terrible. Tears or holes in the cover also ok, within reason. I've...

I figured I'd offer this up here first before Flea-Bay. Maybe someone with a KO that's not 100% original could use it, or someone looking to build something from the frame up. It should be most all of the Dax-specific pieces for the removable front end. The only thing I think might be missing is...

https://minneapolis.craigslist.org/hnp/mcy/d/pair-of-honda-ct-70-mini-bikes/6547942378.html The guy came down from $2500 already. I know there aren't many of these models compared to earlier years, but do they bring decent money? Fork ears aren't perfect, but it looks like most everything is...

So I picked up a very rough early Dax/ST70 this past weekend. It looks to have sat for a long time (outside, too). I don't see these come up on craigslist or Ebay very often at all, so thought it would be something different to have in the collection. Honestly, I'm not up for a full restore or...

These are apparently a half-year only bar set, with mirror holes on both bars, and only a lever perch on the RH bar. They aren't perfect, but I think very usable. The left bar looks to be tweaked slightly, backwards from what I can tell. I don't want to attempt to straighten, will let the next...

Time for me to part with a few things, and hopefully pass them on to someone who needs them. I will update this thread in the next week or two with more stuff. Aftermarket folding aluminum shift lever. Offset, never used. KO (and maybe K1?) rear brake pedal. Looks to be straight, in good...

So, I pulled the Nice engine out of my '94, have a stock motor to put back in. Previous owner did a little splicing into the original harness, which was no big deal to correct back to stock. My only confusion lies in that I have one clipped wire that runs to the CDI box, and am not positive that...

So I reassembled my '81 CT70 that was in pieces for several years. New battery, with key on I get my neutral light and brake light, meaning pressing the pedal or squeezing the lever does nothing, the light is always on bright as if the brakes are being applied. It doesn't dim when brakes are...

Well, I joined the living dead about a month ago (got married), and we honeymooned for two weeks in Thailand, of all places. Everyone asked us why we chose Thailand, and honestly, I don't really have an answer. I guess it was her idea, and I just went along with it. We snapped quite a few...

I bought this bike from a member here a few years ago. It wouldn't rev out cleanly, and with a limited amount of time to tinker and/or ride since buying it, I haven't quite gotten it dialed either, and am thinning the herd a bit. It starts/idles/runs decent, just feels a little "flat" up top...

Well, I am FINALLY getting around to reassembling my '81 CT70 after a few years of it being in pieces. I donated some of it's parts to other bikes/projects over the years, and now am needing to replace them. So far what I'm after is the stainless frame strip, kickstand (just need the stand...

I'm having trouble getting my engine dialed in. Stock Honda Nice 110cc, with a VM20 carb. Intake is matched (or very close to it), so no big-small port transitions. From what I've been told or read, people seem to settle around a 150 main jet. Right now I'm running a 22.5 pilot, 155 main, clip...

Probably a strange request, but does anyone have a 150 main jet for a Mikuni VM? Dealers around here are horrible with stocking things, and won't order until they have enough $$ to avoid being hammered with shipping...I have a lot of other sizes I could trade, as well.

I figured one man's junk might be another's treasure. Some of this may end up in the trash if nobody wants it. Some is probably worth the cost of shipping and little more, if any. Make me reasonable offers. I'm located in Western Wisconsin. PM works best. Here's what's pictured: -Set of...

I'm looking for the aluminum, threaded cap that holds the seal, nylon bushing, etc on the early CT's and Z50's. This is the part that the rubber fork boot/gator slides up onto as well. I'm rebuilding a set on a Z, and one turned off by hand, while the other wouldn't budge even after heat. I...

Not sure how many of you follow moto on here, but that's my first passion, closely followed by these bikes. I thought it was pretty cool when I flipped through the latest issue of Racer X and saw the new DVS shoes ad with Justin Bogle, the 2014 250 East Coast Supercross Champion.

Hi, Recently picked up two Z50's and went about cleaning both carbs tonight. One is a K4, the other a K5. At first look, the carbs look identical. Both marked 655A, but one is marked "MA", the other "KF". Bowls are the same, carb main body looks the same, floats and needle are the same, but...

1977 77 Honda CT70 Front Fork Headlight Mounting Bracket Ear Ct 70 | eBay Claims to be new, but...it's missing the hole for the turn signal. Weird...