Search results

does anybody know what size the rims are on this bike? It has a 2.50 X 17 tire on the front and a 2.75 X 17 on the rear. Reason I ask is I put a 125 lifan in the bike and would just like to drive in on the trails. I want to put knobbies on it . Its easy to find the 2.75 X 17 tire but I can...

Does any one have wiring diagram for this? mine came in Chinese Can this motor run without the battery I am taking off all the lights

For now my CL 70/125 Lifan swap will only be used off road. I took off all the lights and chrome to refurbish and reinstall at for a later date when time allows. For now I just want to ride it around in the woods. My question is do I need a battery if I dont use any of the electrical stuff...

I bought the Lifan 125 and the suggested wiring harness off e-bay. Problem is neither the motor or the harness came with a diagram. Anybody have one or point me in the right direction?

I have been reading some of the posts about this swap. I just pulled the trigger on the 125 motor. What I am wondering what is the best ( easiest, convienent ) way to go electrically? Get this harness you guys talk about to keep it on the 6 volt system? Should I change out the bulbs and coil...

I have a good coil all lights signals work no spark. I have the right resistance on the primary and secondary on the coil. The points are opening and closing and are clean I only get 2.5 volts on the points when open should I get 6 volts? Is this my problem

I think this may be why I cant get any spark. I bought a Chinese 6 volt " replacement coil " off e-bay. The stock coil has two wires this does not. Has anybody used one of these and if so how did you wire it in?

I am tearing my hair out here!!! This is a basket case CL 70. Can anybody tell me the simpliest way to check for spark? All the wires are dissconnected and I have access to the five wires from the engine. The Green / white wire is the neutral safety switch. I have a double white connector...