Search results

Up for sale is my CT70H, all original with 300 miles. Here's a link to my ad on marketplace- https://www.facebook.com/marketplace/item/1174577676294370?ref=search&referral_code=marketplace_search&referral_story_type=post&tracking=browse_serp%3Ad32e228e-1a69-4eea-a265-ecad84c2a25c Contact me at...

My 1969 Z50 is able to start with no battery but my 1970 CT70H needs a jumper wire when no battery is used, what's the difference between them? Also, on my CT70H, does a battery need to be installed in order for the lights and horn to work? Thanks

Recently picked up this 1949 Whizzer Sportsman and I have been looking at my options of what to do with it. I've been thinking about building a little custom using a small honda vertical twin for a motor, maybe a single. Any suggestions on what would make a good swap?

Picked up this 1970CT70H a few years ago with 300 miles on the speedo. The air cleaner element turned to dust after removing side plate and inspecting. Disassembled the carb and had it ultra sonic cleaned. Took it off the bench the other day, put some gas in it and it wouldn't stay running. Took...

This headlight assy. came on my K3. As you can see it has a metal bucket with two openings and a indentation for the neck. The bezel is adjustable like on the hardtails. It is marked: HM-10N-S. The OEM plastic replacement is marked HM-11N-S. What year(s) did these come on?

I'm looking for this item, Honda calls it - COLLAR, FR. 44620-045-020 I have two rears to trade should anyone need one. DrATV said he might have them this week but thought I'd give it a try here.

Recently picked up this 1977 Z50, except for the later style exhaust, this bike is 100% original. Doesn't really need anything (except a stock exhaust) but I'll get it on the bench, service it and give it some TLC. New tires and tubes are already here.

Looking for a solid, stock exhaust system for 1972-1978 Z50 Soft Tail. LMK what you have, will purchase or have some parts to trade.

Just finished this Z50AK4 and used the new bars from CHP. I really like the design a lot, quality is excellent, a little bit wider, better then the stock ones by far!!!

Looking for the following parts for this current build: Kick starter pedal assembly Handlebar Kill switch Wiring harness (2) handlebar take down knobs Kick stand

Trying to locate a kill switch for my Z50 K3 #35300-120-673. Any help sourcing one of these would be appreciated. Thanks

Looking to replace the rear fender on my K2. Mine is useable and I can probably straighten it a little but if I can replace it, all the better.

I am open to offers on this 1969 Z50AK1. Needs work but has lots of potential as all of you can see! Comes with the carb, air cleaner, and key. Located in upstate NY. In box me with any offers!

I picked this little Honda up over the summer and have been doing some maintenance on it. I replaced the seat with one from CHP and also changed out the damaged rear hub with a CNC unit also from them. Cleaned the carb, changed the oil and air filter, lubed the chain etc. Not shown is the NOS...

The original fender that came on this bike was pretty crumpled. I used a dolly and straightened it the best I could. Then I wire brushed the underside, sprayed some self-etching primer on it, taped up the rolled over edge then sprayed with some rubberized undercoating. I like the look, easy to...

I've been working on my '73AK4 correcting some of the issues on this winter project. This switch housing is the on/off type which is missing the rocker part. Can these be sourced anywhere and repaired or do I have to locate another housing/switch? Thanks

Hi everyone, new to this site so go easy on me. Looking for a complete headlight assembly for my latest project. I see most of the parts needed are available new but I thought I would try here for something used in good shape. I also need a set of handlebars but CHP tells me that they are ready...