ct 70

Hey friends, working on my front forks and the two conical dust covers are cracked. Having trouble finding a replacement. Part # from Honda is 51425-126-772 but nothing out there. Looking for an aftermarket or suggestions from those who used something universal maybe?

1969 CT 70 3 spd. Excellent condition. Runs and drives grt. Everything works as it shld. Has an aftermarket carb on it but I do have the stock one to go with it. Bike was restored at some point in its life. Sold with a bill of sale. Asking $4500 obo. Call or txt me at 313-319-0006 Terry

Looking for a the control switch that goes on the handlebars. The original part number is 35130-098-661. Thanks!

The jets in my CT seem to keep getting clogged. My bike will run great for weeks then will shut down in the middle of a ride and I will have to get a tow back to the house. Usually I take the carb apart and clean out the jets and the bike seems to run good again. Is this condition something...

I damaged the stators primary coil taking the flywheel off. Im guessing i can just re-wrap some copper wire to get it done cheap. Has anyone done this before? Are there things i need to get right; type of copper, diameter, proper way to connect it... 87C321CE-C117-4BB7-AE7F-7F0A46196551 by...

Just received a new seat in the mail and wanted to give my two cents worth. Hopefully this helps others who might be in the same boat. There aren't many options for this particular model seat. In general, I'm extremely happy for $120 delivered. It's soft, squishy, seemingly well made...I just...

Hello I have a honda ct70 1970 and I would like to know what are the simplest system to cool the engine, I do not want to install a radiator of oil cooling and having to change my oil pump for a more powerful but I would be close to install another type of smaller system. Also I would like to...

Hello Recently I had to open the engine of my Honda 1970 ct70 because it burned oil and I discovered that I had to replace the cylinder by a new one, but the question that I ask myself is that I have an aftermarket head that must be used with a flat top piston, but I also have the original head...

I have a CT70 motor with damage on the cylinder head. I also have a Z50 clone head cylinder left over from another project. Can any tell me if the z50 head can replace my damaged ct70 head?

I am selling a fully restored 1970 Honda CT 70, 3 speed. Absolutely no expense was spared in the build of this bike. Everything painted was professionally done in Powder Coat that is an exact match of the original Candy Ruby Red. All black was powder coated. The rims, hubs, motor are Powder...

I have a 1970 CT70 that has had a full restoration. The motor has been fully rebuilt. When bench testing before putting the flywheel and clutch on it shifts perfectly fine. Starting in Neutral you shift down to go 1-3. When I finish assembly, start it up and drive it suddenly 3rd gear doesn't...

I just bought a 69 CT 70 silver tag. I am new to these bikes and don't really know what makes it a silver tag. I am wanting to restore it but I don't want to loose any "special" parts that make it a silver tag. What makes the bike a silver tag? and are there specific silver tag parts?

i am new to this forum. I am looking for insight in to what I have, and suggestions as to what should be done with this bike. I found the bike at a scrap metal yard. i was dropping off some scrap and I saw the bike in the pile. i asked about it and ended up buying it for scrap price. i could not...

Anybody ever installed turn signals on an old CT70. I have a Sapphire Blue 1971, so it was not manufactured with turn signals. I don't know how possible if at all it is to install some turn signals onto it. Any advice?