ct110

hey guys, i recently bought myself a CT110 postie bike to mess around with customizing. i was doing some searching online and i found a Yoshimaru exhaust for a CT125 and it looks as though they would fit my CT110. however with it being so expensive i wanted to chat with a few forums before i...

For what I’ve seen on YouTube and looking in other forums when buying a lifan engine some of them don’t fit properly in the ct110 and you have to drill out holes and buy special brackets and even then there is something wrong with the foot pegs hitting the brake. Can anyone tell me or put some...

A couple of weeks ago I had to take the right side cover off of my ct110 and when I was finished after putting the case back together I noticed the kickstarter wasn’t engaging the engine, after a couple of tries taking off the cover and putting back on again it was still doing the same thing ( I...

Just took apart my ct110 to replace the shift drum stopper and when I put it all back together the engine doesn’t kick over but it moves the back wheel. I’m pretty sure it is todo with the clutch but adjusting it doesn’t do anything. Any ideas?

Hey All I bought a 1995 Ct110 about 3 months ago and I have a couple of questions. First of all it takes a few tries to get it into gear and seems to ’miss the gear‘ and when its in gear it occasionally slips out of gear. But after doing some research online I’m pretty sure that it is something...

I completely disassebled my 1984 CT 110. I put the shift drum, forks, and transmission shafts (with gears) into the case. I verified that it can shift through all of the gears. I then put it into neutral. I can spin the main shaft freely. When I put the right side case on, I can turn the main...

All, I just recently aquired an 86 CT110. I replaced the fuel lines (APB - 6.2 heavy duty from AUS) and installed inline fuel filters. Anyone have a picture of how they did inline fuel filters? I have so much line that the system doesn't flow well, but can cut it shorter because the line...

I found a 1981 CT110 for $400 and was wondering if it’s worth it and also where I can get parts for this guy if they are available? DRATV doesn’t have many parts for the 81 model that I could find.

I have a number of different project bikes that I am working on and in trying to find for cable part numbers for each of the bikes I ended up building a table of Honda cable part numbers for all years of CT200's, CT90's, and CT110's, and thought I would share a link to the table on my blog in...

I am working on my newly aquired 1981 CT110 and am having some shifting problems, it seems to stick between gears, having troubles shifting up and down, down seems to be worse. Have tried adjusting the clutch, but I don't think that is the problem. Currently have the right side cover off and...