ct200

I’m trying to find out where I can get these two little bolts on the fuel value I thought they were m3 x .50 they aren’t Any ideas or places I can order bolts for the fuel valve, obviously tap and die a new size but would rather not.

HI! I picked up my first CT this winter. The PO stated it hadn't run in 5 years. I started by opening up the carb. I cleaned it thoroughly and replaced the jets/o-rings that came in a rebuild kit. Right now I can get it to fire up for 1-3 seconds with starter fluid but it won't stay...

I have a CT90 blog where I also do posts on CT200's and recently did a post on how to reassemble a Honda CT200 push rod style engine along with adjusting the points and setting the timing and thought I would share a link here in case the information was useful to others working on CT200's or...

I have a number of different project bikes that I am working on and in trying to find for cable part numbers for each of the bikes I ended up building a table of Honda cable part numbers for all years of CT200's, CT90's, and CT110's, and thought I would share a link to the table on my blog in...