Found a local buyer and this bike is SOLD, gone, 4/19/2011 ...Thanks for looking
Hello, I have decided to sell my bike and begin another project. The bike for sale is a 1972 Honda CT70 K1 in Special Candy Yellow color. The bike is in good shape, and runs fantastic. It is unrestored and...
single family owned
976 miles
3-speed auto-clutch
runs good, tires good
exhaust has a hole that i temporarily patched, works for now but will need replaced
chrome has some pitting but not extreme
no taillight lens or battery
not a perfect bike but in great shape for the year (i think)
ready...
Trail Buddy Kenda Tire 120/90-10
Nice super aggressive tire for the dirt and the road. This is the biggest tire you can fit on a CT70. 120/90-10
-This Part Will Fit- All CT70s 1972+
All Replicas, will not fit with low mount fender
I just want to say I called Ron up because I wanted to set my ct70 up with a complete lighting system. Ron sat on the phone with me and set me up with all I needed for parts. He helped me everystep of the way from selection-instilation-to wiring the bike.
This guy spent hours on the phone with...
I am trying to find a shop manual for my CT70, and only have the original owners manual to go by. For now, what kind, or grade, of oil is required for the clutch, and for the fork?
The manual only says that the fork needs 3.5ozs, and says nothing about the clutch. Any help?
Thanks
This is a question that's been asked before, but the answers didn't seem right to me. I'm restoring a CT70HK0. I was careful when I pulled apart the 4 spd box to make sure I didn't lose anything. When I pulled out the main shaft there was no thrust washer between the shaft and the left side case...
This is a question that's been asked before, but the answers didn't seem right to me. I'm restoring a CT70HK0. I was careful when I pulled apart the 4 spd box to make sure I didn't lose anything. When I pulled out the main shaft there was no thrust washer between the shaft and the left side case...
This is my 1970 Honda ct70 trail bike. This bike has been in my family since at least the late 1980's (ever since I can remember). For the past 13 yrs it has been collecting dust in our garage and I just recently decided to start restoring it.
Sorry for the crappy pics, will hopefully have it...
just bought 2 1980's ct70s. having some troubles getting both running !
bike 1
- starts fine
- smokes like hell
- no power and is sluggish, bogs out real bad
-jumps out of gear a lot !
bike 2
- sputters a little bit when trying to be started that's it
- refuses to run off the carburetor (...
This is my 1982 Honda CT70. I paid $120 for it. when I bought it, it did not run. It had no carburetor and it sat for a few years ! I since then have got it running and put new piston rings and top end gaskets in it. I removed all the lights horn etc as they did not work. It usually starts first...
Hello,
I found what I felt was like a good deal on Craigslist.
- One 1970 CT70 frame, wheels, all hardware.
- Two identical stock motors. Almost a complete bike, about 89-92% complete.
- Brand new Clymers manual.
150.00 Bucks
*Needs carb, gastank, seat cover. (have good foam)
Saw it and I...
I want to remove all the lights and blinkers etc and get rid of all that clutter of wires in the headlight. But not sure which ones can be cut out. Help me out !!!!
ITS A 1982 HONDA CT70. it idles fine but when i rev it or try to drive it, it bogs out or quits. what could be the problem? it smokes but i have new rings on order but they wont be in for another month or so from the honda dealer. could it be the rings causing this problem or could it be...
I am trying to order some parts from the doctor, with a Canadian credit card and billing address, but shipping it to an American address. I only get an error message saying that it cannot be processed. Anything that I am missing? Please let me know if you have any suggestions, and I have already...
Im rebuilding my 1979 CT70, I purchased the front fork re-built kit and I want to make sure I install the fork seals properly.
Does anyone have a diagram or know the best way to get that done?
Ive read that the take 3.2oz per fork, is that also the case?
Thanks in advance!
Up for sale is a carb setup that came off of my 1972 HK1. It was used for about a year and a half so far. I am selling it because I am upgrading to an 88cc bore kit that requires a new assembly. I would like to get about $110 obo for it. The carb and the air filter were bought new from the...
Hey there guys. I was originally going to install this engine into my ct70k0 but ended up selling her so my loss is your gain. Engine is brand new in box. Took her out to test fit and crank over but thats about it. 4SPD 1D 3U shift pattern. Comes with side cover, intake tube, shift lever...
140 CC GPX Engine
GPX 140cc Engine fits Pit Bikes and other Minis - Engines - GPX Engines - GPX 140cc Engine fits Pit Bikes and other Minis - TBolt USA, LLC
Does anyone know if this engine will fit in a CT70 K2? Has anyone used this engine? Is any modifications necessary to fit it into the...