flywheel

Want to buy a flywheel for a CT70H or SL70. Must be hitachi F120 Had engine vibration. Installed CDI kit and found my flywheel was cracked!

Hi, I’ve got five Hitachi flywheels that I’m trying to identify. I’m not sure which bikes they go to, all are just bare flywheels no timing advance. Thanks for the assistance.

I purchased a replacement crankshaft for my 1971 K1 motor off of ebay. The thread end of mine is slightey bent and I wanted a replacement. Now it's time to install the Hitachi F120 Flywheel and I discover that the taper on the crankshaft is larger than the stock crank and the flywheel will not...

I recently picked up a 69-70 CT70. I opened up the flywheel and discovered it only had one coil. I bought a rebuild kit from CHP but it didn't come with any instructions. Without the original coil I'm not sure about the connections. There is a green wire that looks like it goes from the top coil...

I have a 72 ct70h with a mitsubishi flywheel. I installed new points and went to set them. i saw they weren't opening because the fly wheel wasn't engaging the breaker arm because it wasn't reaching the points? is it possible the shaft came out of position? I make sure I line up the key chuck on...

Hey All! This is my very first post to the forum and I am really really hoping for some help. I have a 1970 CT70h model, I have owned it since I was 12 (best christmas gift EVER), it used to run but no longer does. It got left for quite a few years when I was away at college and someone let it...

I'm currently rebuilding a 1979 Z50JZ that I have fitted with a brand new YX140 engine. As I would like to keep the bike looking as stock as possible, I have painted the cylinder black etc, and would like to fit a Honda cover over the flywheel / magneto. Although I have searched countless...

Hello, I found what I felt was like a good deal on Craigslist. - One 1970 CT70 frame, wheels, all hardware. - Two identical stock motors. Almost a complete bike, about 89-92% complete. - Brand new Clymers manual. 150.00 Bucks *Needs carb, gastank, seat cover. (have good foam) Saw it and I...