honda

Looking for a keen buyer for a 1970 Z50a k2 in mint condition , fully restored with custom twin exhaust : AUS . Enquire within

I am restoring a Honda ST70 - not sure of exact date but somewhere around 1972 I guess - S/N ST70-561867. Looking for advice on how to fix a gear shifting issue. I had it running but it had no power and would not shift into third gear. Have opened the engine up to replace gaskets and rings and...

hey guys, i recently bought myself a CT110 postie bike to mess around with customizing. i was doing some searching online and i found a Yoshimaru exhaust for a CT125 and it looks as though they would fit my CT110. however with it being so expensive i wanted to chat with a few forums before i...

Just picked up this little guy. Runs beautifully.

Quite a few months ago I set out to find a Honda mini to give to my father. He grew up riding z50s and ct70s. I found a xl80s in very nice condition minus the fuel tank and seat cover. I picked it up for $250 and a 8 hour round trip. I presented it to him for Christmas. He loves it. And will go...

Hello everyone! I just listed my 400 mile, all original, 1978 Honda CT70 for sale on bringatrailer. If interested feel free to take a look here! Thanks!

Hey guys. My name is Jacob Scroggs. I’m from Brookhaven MS and I’m new to the forum here. I’m starting a 1973 CT70 build and I’d like to share it with you guys. This bike has been in my family since it was new. And the tag I found on it says Louisanna 1977. The old odometer says 7143 miles...so...

So i'm looking to purchase a speedometer and cable for my 73 CT70 and have run into an issue. Online a lot of the speedo cables are labeled separately as k0 cables, k2 cables etc. but all of them look pretty much identical with the split tongue end. Are these cables interchangeable? Is there a...

So I need new front fork boots and im assuming seals as well for my k2 but I dont want to break anything. I have the fork off, do I just pry from the bottom of the boot and pull off? Any tips? Its on there pretty good. Pictures below.

So, I used this site probably a year ago maybe a year and a half ago when I first purchased a 1970 CT70, I originally intended on Restoring it but things got in the way, so I ended up selling it with very low compression and difficult to push start. Anyways long story short I miss that thing and...

Hello I have a honda ct70 1970 and I would like to know what are the simplest system to cool the engine, I do not want to install a radiator of oil cooling and having to change my oil pump for a more powerful but I would be close to install another type of smaller system. Also I would like to...

Hello Recently I had to open the engine of my Honda 1970 ct70 because it burned oil and I discovered that I had to replace the cylinder by a new one, but the question that I ask myself is that I have an aftermarket head that must be used with a flat top piston, but I also have the original head...

when running the bike and hitting 3rd gear, it runs good. hitting about 43 mph. if i hit 4th gear on it I feel no difference. i want to be able to hit 55 or 60 mph and mostly all my riding will be street. 8 mile to work and back home. right now its running 29/16 with the 10" wheel. I've been...

While cleaning out my parents garage, I found my first mini bike. If memory serves me correctly my bike was a 1970 Honda Mini Trail "Amigo". Not sure, I was probably 11 years old. Anyhow - just curious....is this easy to fix - parts readily available, or shall I donate it? Thanks.

New to the forum. Just picked up this original 1970 Z50A K2 at a local estate sale. They said that the last time the bike had been run was about two years ago. Smelling the fuel was a good indicator that they were telling the truth. :21: Anyway, I've never dealt with this model before and I'm...

For Sale: 1970 Honda CT70 "Trail 70" 3spd Semi-Auto Street Legal This CT70 has been fully restored and upgraded for modern street use. - 88cc Big Bore Engine w/: - Race Cam - High Volume Oil Pump - Oil Cooler - Braided Steel oil lines - 20mm carb - CNC inverted front shocks - Front Disc Brake...

I am selling a fully restored 1970 Honda CT 70, 3 speed. Absolutely no expense was spared in the build of this bike. Everything painted was professionally done in Powder Coat that is an exact match of the original Candy Ruby Red. All black was powder coated. The rims, hubs, motor are Powder...

I have a 1970 CT70 that has had a full restoration. The motor has been fully rebuilt. When bench testing before putting the flywheel and clutch on it shifts perfectly fine. Starting in Neutral you shift down to go 1-3. When I finish assembly, start it up and drive it suddenly 3rd gear doesn't...

Hi All, I'm after a rear rack, if one existed, for a 1967 Honda CL90. The vehicle is in the UK. Many thanks Mark

i am new to this forum. I am looking for insight in to what I have, and suggestions as to what should be done with this bike. I found the bike at a scrap metal yard. i was dropping off some scrap and I saw the bike in the pile. i asked about it and ended up buying it for scrap price. i could not...