jet

Hi mates, i installed a yx140 on my ct70 and im in the tuning process of the carburetor . The carburetor is a Nibbi pe26 and it idle well for an extended period of time and the engine got a lot of power at top end. I have a problem when i’m cruising around (1/4 throttle to 1/2) and i suddenly...

The jets in my CT seem to keep getting clogged. My bike will run great for weeks then will shut down in the middle of a ride and I will have to get a tow back to the house. Usually I take the carb apart and clean out the jets and the bike seems to run good again. Is this condition something...

Hey Guys, New to the site, and have really enjoyed the 2 weeks of reading all the useful info. Today I decided to post a question I cant seem to find an answer to. just bought a 1979 Z50, and was told it needs a carb cleaning. so I soak it and run wire through every port (the smaller jet...

After having issues getting my CT70K0 running right again after replacing the jets with new ones, it's finally running correctly. However, the slide won't go down all the way with the needle in place and therefore it's idling way too high. There's enough slack in the cable, but now the needle...