shifting

Hi, Two questions, that I hope some of you dedicated people can answer. I had an engine restored, and the guy did a terrible job. He had used lots of old worn and damaged parts, for an example a cylinder with a very large crack running through it, "fixed" with some kind of sealant and a thick...

I got a bike that seems to have a curious issue. When it's cold, everything seems to work fine. But after riding it about 2.5 to 3 miles, the gears don't cleanly change. From 3rd to 2nd, for example, it hangs with the clutch fork keeping it out of a gear. When you tickle the shifter with...

I have a 1970 CT70 that has had a full restoration. The motor has been fully rebuilt. When bench testing before putting the flywheel and clutch on it shifts perfectly fine. Starting in Neutral you shift down to go 1-3. When I finish assembly, start it up and drive it suddenly 3rd gear doesn't...

ok i have a 73 honda ct-70 3-speed auto and while i was ridng the other day i had trouble with the shifter getting stuck when i would shift up and when it did that the shifter would stay up til i clicked it down so it would go into gear and i looked inside the crankcase and everything is fine so...