timing

Hey guys, Super lost about this one I'm trying to set the timing on my 1978 honda ct90, most of the guides I have read and watched have a pointer at around the 4 o'clock mark whereas my bike only has one at 3 and a space at 4 where it looks like one could fit. My confusion starts when I set the...

I have a CT90 blog where I also do posts on CT200's and recently did a post on how to reassemble a Honda CT200 push rod style engine along with adjusting the points and setting the timing and thought I would share a link here in case the information was useful to others working on CT200's or...

Hi all, I'm new to this, but working on a '73 ST90 K0 project. It's generally going well, but I ran into an issue. Per the Clymer's manual, you simply remove the points plate, remove the center bolt and the timing advance plate is supposed to come right off. However, it won't budge and I...

Ive been working on trying to get my 74 CT going for a while and am working my way through what could be preventing it from starting. I am troubleshooting the carb and appreciate the advice members have provided (Also see my other Thread regarding Carb Troubleshooting). I thought I would start...

Hello, Sorry if this has been addressed in many other posts but I can't seem to find the answer and or the things that have been suggested have not worked so I am turning to the experts. Background: It is a 1979 CT70 frame, carb, head, cylinder and piston with a 1970 or so SL70 block or lower...