wheel

I'm in the process of modifying a CT70 and one of the things I want is 12" wheels. I'm going with a +2 swingarm from Tbolt but I have a handful of questions regarding the idea of 12" wheels. Tbolt also has a set of one piece aluminum 12" wheels that will bolt onto the OEM hubs. I don't hate...

I just wrapped up a couple wheel re-spokes for my C102 restoration. I planned to center the hubs. But before I do that, does anyone have any specs on offset?

Sharing some learning - The front wheel bearings on my ST90 project were completely frozen and in need of replacement. These bearings are very difficult to remove. There is an axle sleeve in the hub - in between the two bearings. The presence of the the sleeve makes it impossible to tap either...

Hi guys, I disassembled my rear wheel on my CT70 K2 1973 to change tire and brake... So far I have been able to change everything but I have a question to reassemble the wheel on the frame. As per the scheme, one collar go on each side of the wheel but I don't remember if the spocket side...