wiring

Hello, I have (sadly) a chinese Jincheng Bing Bong replica of a Honda Z50, It had a 3 speed fully manual 50cc engine with broken shift forks (diagnosed with the help from this forum :) So I decided to save up some money and buy a 125cc engine, instead of fixing the old one. I have already...

Hi all, First post here! I’ve been having an issue with my newly acquired CT90, that I’ve searched an answer for, but I just keep coming up short. The bike is having an electrical issue with the front lights. The speedometer bulbs were blow, but the blinker and front light(s) were perfectly...

So i'm a little confused about wiring up a headlight on my 1973 trail 70 after getting a Lifan 125cc engine. Theres a yellow wire coming out of the engine, which from my understanding is an active power wire. My question is, would I be able to hook the headlight up to this wire to power it, or...

about a month ago, i revived a 1980 CT70 that has been sitting since about 1985. It was running fine after i rebuilt the carb. After about 20 minutes the neutral light quit working, i think this was due to the bad battery (since replaced and it still doesnt work, it probably blew). the headlight...

just bought this and put a new battery and coil in. Cleaned up flywheel and points. Cleaned carb. Runs pretty good. All brake and tail lights work. Head lights and horn not working. Think the horn switch was bad so I’m replacing it. Still can’t get the headlights to burn? Help

Hey guys, its been a couple of years since Ive posted, just have been side tracked with school, work etc... BUT finally back to working on the bikes. I originally got into these bikes because of my Grampas 1972 CT70 at the cottage, first riding on the back with my dad, to growing up to ride by...

I purchased a new wiring harness from CHP for my 1974 K3. Has anyone used this particular harness. What was your experience with it. I currently have the motor out of the bike right now. Can someone share with me what is involved with removing and replacing the existing harness with this new...

I want to remove all the lights and blinkers etc and get rid of all that clutter of wires in the headlight. But not sure which ones can be cut out. Help me out !!!!

I have a 78 Z50 that I am converting into a street legal bike. I already have a 2008 Lifan frame that is titled and plated. I purchased some clone handlebar controls for horn, turn signals, etc. I would like to purchase a wiring harness that has all of the street legal hook ups in place...