Anyone know where I can get this 3 valve head gasket

A

Acemccracken

New Member
I found it at OOracing in GB but they don’t ship to the U.S. so any help finding it would be greatly appreciated. It’s for a 110cc 3 valve 51mm bore.
IMG_8538.jpeg
 
oo racing has the 52.4mm head gasket for a 3 valve. You can buy a 52.4mm gasket on ebay from Dratv he calls it a lifan 120cc 52.4mm gasket. It will work. Ever so slightly bigger is ok, smaller is not.
 
OLD CT said:
oo racing has the 52.4mm head gasket for a 3 valve. You can buy a 52.4mm gasket on ebay from Dratv he calls it a lifan 120cc 52.4mm gasket. It will work. Ever so slightly bigger is ok, smaller is not.
Click to expand...
Not the right type. Very close but not. Thank you for looking though, I appreciate it.
Midnightpromises said:
What is the application? I found some but they're fifty four millimeter bore
Click to expand...

There are many that are close but I need the two bolt outside. Application is a 110cc 3valve. SDG152FMH engine. 04062285.
 
Last edited:
Ok, now I see what you mean. I looked all over and a site in Turkey showed it but the error 404 came up, when I clicked on it. This looks like the type of head you have. You can buy the whole engine for $260 ''all in'' delivered. I have bought 4 engines so far from Alibaba.
 

Attachments

  • IMG_3151.jpg
    IMG_3151.jpg
    17.6 KB · Views: 25
  • IMG_3150.jpg
    IMG_3150.jpg
    17.7 KB · Views: 26
  • IMG_3152.jpg
    IMG_3152.jpg
    17.3 KB · Views: 20
OLD CT said:
Ok, now I see what you mean. I looked all over and a site in Turkey showed it but the error 404 came up, when I clicked on it. This looks like the type of head you have. You can buy the whole engine for $260 ''all in'' delivered. I have bought 4 engines so far from Alibaba.
Click to expand...
Yea, I know I can get a whole new one but I’m the kind that just hates to throw it away and I just keep thinking I can make it work. I could if I could just find a head gasket 😄 but I might have to give this one a toss. Thanks for your help!
 
I can definitely empathize. I'm rebuilding a Honda C240 engine and can't find a gasket set. CMSNL sells some individual gaskets, but it's like, "Twenty dollars for a cylinder/head gasket?! and I need two of them?!" I can make the rest of the gaskets with some gasket maker if I have to, but I can't use gasket maker on a cylinder head.
 
McPow said:
I can definitely empathize. I'm rebuilding a Honda C240 engine and can't find a gasket set. CMSNL sells some individual gaskets, but it's like, "Twenty dollars for a cylinder/head gasket?! and I need two of them?!" I can make the rest of the gaskets with some gasket maker if I have to, but I can't use gasket maker on a cylinder head.
Click to expand...
Yea and with the tariffs some country’s won’t ship to the US. Kinda sucks.
 
Back
Top