C110/C115 air filter rebuild

jgcoutts

New Member
Has anyone have experience disassembling the original air filter, the one on my bike I’m restoring had the according filter cut off and glass fibre stuffed inside the mesh and I’d like to bring it back to stock.

In particular I need to remove the yellow glue used to join the halves together and fasten the filter material. Is there a solvent for this or should I burn it off?
 

Attachments

  • 73E05001-3ACF-4FBC-8A2A-62826DA780FC.jpeg
    73E05001-3ACF-4FBC-8A2A-62826DA780FC.jpeg
    1.6 MB · Views: 5
  • 640C3D06-3805-4BE7-A809-6BA26D9DDC56.jpeg
    640C3D06-3805-4BE7-A809-6BA26D9DDC56.jpeg
    1.8 MB · Views: 5

jgcoutts

New Member
For what it’s worth I came up with this solution, section a readily available CS65 one using a zip cutter and hacksaw, then heat gun to soften the glue and reassembled with epoxy. One small hole to relocate for the mounting screw and it’s done.

B77316F2-822F-44D3-AAE9-2BFCA227B6A4.jpeg
 

Attachments

  • 87F9B8DD-8FE9-4AFA-8F28-18C8BEA72EAA.jpeg
    87F9B8DD-8FE9-4AFA-8F28-18C8BEA72EAA.jpeg
    1.6 MB · Views: 3
  • 1FBF4F5A-EA5C-49C4-B25B-85C3FEDBC6E7.jpeg
    1FBF4F5A-EA5C-49C4-B25B-85C3FEDBC6E7.jpeg
    4.3 MB · Views: 3
  • 6EE31BEB-3728-4448-9074-C6D6D44FF06C.jpeg
    6EE31BEB-3728-4448-9074-C6D6D44FF06C.jpeg
    3.2 MB · Views: 3
  • 7E0E18D7-7C2B-4D33-BD70-6DE365554E90.jpeg
    7E0E18D7-7C2B-4D33-BD70-6DE365554E90.jpeg
    3.8 MB · Views: 3
Last edited:
Top