Hooper Simple Wiring Harness

[Pineapple1]

Hello again, Still anticipating purchasing a 110cc Lifan motor from Hooper. It's my understanding that the motor comes with the CDI module, rectifier, and coil. Does this mean that the only other electrical thing I need is a harness? If so, does it look like this "Simple" harness will work?

[LINK]Hooper Imports Experts on Chinese Motorcycles and Parts - Product Detail[/LINK]

I'm fairly handy with electrical stuff so I was planning on doing my own harness. However, this will save me a lot of time messing around with the plugs and it's pretty cheap! Any thought? Thanks!

 

[Miniac]

I could be wrong, but I think that the harness you linked to is a stand alone wiring harness, . . . just plug into the engine, the coil, the CDI box and the kill switches, . . . what you'd need for an offroad only set up. If you want to mate it to your existing harness on a CT70 I think you can use:

ENGINE_SWAP_WIRING INSTALLING_A_CDI ENGINE_IN_POINTS TYPE_BIKE (SUB-W-1)

Hooper may also offer something like that. You'll still need to deal with the 6V/12V issues; either with a 6V regulator or a 12V battery and lights, etc, etc, but that should point you in the right direction. So the question is whether or not you plan to ride it on the street.

-kevin