TheExtremeHillBlly
New Member
I am working on the wiring of my XL70 and have hit a road block. I chased a wire that was without power back to the Key main switch. the wire labeled E that connects to the head light is the one and I found it has no power at the solder when other components did, meaning it isn't a bad wire. I am assuming that the problem lies here but I cannot open up the housing to figure it out. I am confused by the labeling of these wires, I understood that E stood for Earth/ground but the Headlights were attached here. the taillight is labeled "HL" which I assumed was for "Headlight". the positive of the battery is connect to G which has broken my understanding. I would appreciate the advice of someone who understands more than me.
are these wired wrong and I should trust the labeling to fix it?
Is it Wired Correctly and the labels don't mean what I think?
Does someone at least know how to open one these things so I can figure this out?
Please help if you can!
PS. I am unworried about the yellow wired labeled SF or the black ignition wire as the bike starts on the first kick.
are these wired wrong and I should trust the labeling to fix it?
Is it Wired Correctly and the labels don't mean what I think?
Does someone at least know how to open one these things so I can figure this out?
Please help if you can!
PS. I am unworried about the yellow wired labeled SF or the black ignition wire as the bike starts on the first kick.
