PINK WIRE ?

MikeSez

New Member
Theres a pink female wire with current coming from the magneto. It has no pink male connection. The only male connection left over is white. Plugged into the pink, all the white should have power but they all all dead with no current. Any ideas?
 

MiniBike Mike’s Garage

Well-Known Member
This is a super vague post. You try might suppling more info.

I will try to read between the lines……

Is this a 12v engine, with a pink wire coming from the stator? If so, my recommendation is to purchase a new stator plate off of Amazon, one with a white and yellow wire. It’s like $17. I have never had any luck with the stators with a pink wire.
 

MikeSez

New Member
Nope... the cheap ignition switch (brand new) had a broken white wire
I repaired it and plugged the white into the pink. And the thing runs xith lights....AMEN
 

MikeSez

New Member
This is a super vague post. You try might suppling more info.

I will try to read between the lines……

Is this a 12v engine, with a pink wire coming from the stator? If so, my recommendation is to purchase a new stator plate off of Amazon, one with a white and yellow wire. It’s like $17. I have never had any luck with the stators with a pink wire.
Sorry ... yes, its a pink wire coming from the stator. I ended up just pluging the white wire into it and traced it to a broken circuit/solder point on the key switch. Its all good now.
 
Top