Rear wheel reassembly - collar

P

plopio

New Member
Hi guys,


I disassembled my rear wheel on my CT70 K2 1973 to change tire and brake... So far I have been able to change everything but I have a question to reassemble the wheel on the frame.

As per the scheme, one collar go on each side of the wheel but I don't remember if the spocket side collar should be insert in the oil seal like I did... As per pictures below, could you tell my if It is good?

Thanks,

Plop

IMG_2649.jpgIMG_2650.jpgIMG_2652.jpgIMG_2653.jpgIMG_2655.jpgIMG_2659.jpg
 
One spacer is actually slightly taller and i mean slightly.That's the one you want on the sprocket side.Usually it's real easy to tell the difference on a used item,as it has a ''rub'' groove from ''riding'' in the seal.
 
Back
Top