Speedometer rebuild

Discussion in 'Tech Area' started by VMXracer, Nov 6, 2018.

  1. VMXracer

    VMXracer New Member

    Joined:
    Nov 27, 2017
    Messages:
    3
    Likes Received:
    0
    OK, I have been learning a lot from reading many of the posts on this site so I thought I would actually post one myself. I picked up a CT70H-K0 a while back and have started the "restoration". I thought the speedo was beyond repair, primarily because other than the face decal, rubber seal and glass, individual parts do not seem to be available. I thought about buying a used speedometer for parts, (primarily for the bezel), but they seem too much money for the parts I needed. I am waiting on the face decal, main seal and glass to arrive so I thought I would try my hand at "straightening" the bezel myself. A bit tedious, but really not that difficult. I will
    post more pics when it is done.
    bezel (1).jpg bezel (6).jpg bezel (2).jpg bezel (5).jpg
     
  2.  
  3. ctbale

    ctbale Member

    Joined:
    Apr 20, 2008
    Messages:
    978
    Likes Received:
    19
  4. VMXracer

    VMXracer New Member

    Joined:
    Nov 27, 2017
    Messages:
    3
    Likes Received:
    0
    Go figure. I actually saw this before I took mine apart. Thanks for the info. It was very helpful.
     

Share This Page