tbolt stator rebuild kit

Discussion in 'Tech Area' started by saskct70s, Mar 14, 2019.

  1. saskct70s

    saskct70s New Member

    Joined:
    Dec 20, 2018
    Messages:
    25
    Likes Received:
    1
    hi there, has anyone installed a tbolt stator kit? i am wondering what the extra two little wires on bottom sides on both coils is? they are only 1 inch long and look to be an extra ground that oem does not have....perhaps they go under the coil mounting screws?
     
  2.  
  3. allenp42

    allenp42 Active Member

    Joined:
    Apr 1, 2014
    Messages:
    782
    Likes Received:
    206
    Can you post a pic? By looking at their website it's a TBParts kit. Just re-read your post. It's the ground if it looks like this.
     

    Attached Files:

  4. saskct70s

    saskct70s New Member

    Joined:
    Dec 20, 2018
    Messages:
    25
    Likes Received:
    1
    yes thats the wire..the other side has no yellow insulating jacket. not entirely sure how to route this without it contacting the condenser body..
     
  5. saskct70s

    saskct70s New Member

    Joined:
    Dec 20, 2018
    Messages:
    25
    Likes Received:
    1
    this is what i have done thus far...before felt installed
     

    Attached Files:

  6. saskct70s

    saskct70s New Member

    Joined:
    Dec 20, 2018
    Messages:
    25
    Likes Received:
    1
    other side
     
  7. allenp42

    allenp42 Active Member

    Joined:
    Apr 1, 2014
    Messages:
    782
    Likes Received:
    206
    Not 100% sure what I'm seeing. This is how it should look.
     

    Attached Files:

  8. saskct70s

    saskct70s New Member

    Joined:
    Dec 20, 2018
    Messages:
    25
    Likes Received:
    1
    ok thanks very much
     

Share This Page