WTB: K1 forks, or just the uppers, Z50AE-138xxx engine

[monkeydad]

Need forks because PO ground off the head light mounting ears. So I can take just the upper part.

Need Z50AE-137XXX TO 139XXX range for my Z50A-138438 Can be block only.

Thank you so much @darrel gunderson for the 131xxx block! I made an error on the OP, I will use this block of yours until I find something closer. Knowing full well I'll probably never find one closer!

 

[darrel gunderson]

 

[Robert thran]

If you or anyone you know is good at straightening metal I have a set but the ears are bent..even after straighten they most likely would still need a skin of bondo before paint... $50 as is or $150 if you rather me straighten an prep. Plus ship. Just P.M. me if interested and I’ll send pics..

 

[monkeydad]

View attachment 73446

Thank you Darrel for the smooth transaction!
Erich

 

[monkeydad]

If you or anyone you know is good at straightening metal I have a set but the ears are bent..even after straighten they most likely would still need a skin of bondo before paint... $50 as is or $150 if you rather me straighten an prep. Plus ship. Just P.M. me if interested and I’ll send pics..

Can you PM pics?
Thank you!
Erich

 

[bundyitis]

any pics?

 

[Robert thran]

That’s an old post from January..are you looking for z50 hard tail forks with good ears or soft tail forks..I think I might have both?

 

[bundyitis]

yes 1970 z50 hard tail w good ears

 

[Gary]

Someone at one time reproduced just those ears,thought I saw them in the past on ebay but can't find them now....