Search results

Anyone running amsoil, A friend of mine tried it in his Harley after reading all the hype about it. The oil temp in his bike dropped 20 degrees, less heat less friction.

That's what I was referring to , could not remember the name. Thanks

Watched a guy on youtube scrape the body work on his old quad with a wood working scraper then take a propane torch and melt a gloss back into the plastic, looked good. Scott

No, I scrapped it years ago, Pm me with what you need I have a few pieces still kicking around. I'm in Thunder Bay

CJ No thanks needed but appreciated, Glad the girls are having fun, enjoy the time together as they seem to grow up so quickly. Scott

For an original rider, I don't think you could get much better, looks great to me. I hope the grand kids have a blast. Scott

I had a 84 passport that I bought for $150 with 107 original miles, unfortunately it was put away wet and in rough shape. The engine ran perfect so I pulled it along with the wiring harness and installed it in my daughters 1969 z50. The electric start sure makes a nice edition to the bike. Scott

The 415 and 420 are the same pitch, the difference is the thickness of the sprocket. I have a z50m that needs a set of sprockets so I plan on skimming the thickness of a 420 sprocket set to the proper thickness. I think tsubaki's web site lists the chain and differences. Scott

Its just a paint job away from being original, but I do understand where you are coming from, I'm still going with EG. Scott

I don't understand peoples obsession with resale prices affecting their decision ,We are talking about a ct70 not a million dollar car. Paint it emerald green and enjoy the bike that's why we own them. You may never sell it and will wish you painted it EG years ago. Scott

CJ, I'm happy to help out, hope Sharon has lots of seat time this summer no pun intended. Enjoy Scott

I found the seat, it is ready to bolt on and I believe it is 4 inches shorter than the stock seat on the lowest set of holes. I now have to find my scale to weigh everything and then I will PM you. Scott

37-38 is pretty good, I built my daughter a 1969 z50 with a 1984 c70 passport motor and I managed 41mph. The motor only had 100 original miles and is cdi that's probably why I hit 41mph. Scott

Cj here are some pics of the headlight bucket. Your daughter looks ready to go. I have a nice solo seat that I reworked to lower the seat height for my daughter, if I can find it your welcome to it. Scott

I will let you know shipping cost tomorrow. I have used copper washers to seal leaky drain bolts, trick is to anneal the washer first. Scott

cjpayne , I have a bare headlight bucket that is surplus to me, needs some straightening. Yours for free if you want it, pics available just ask. I have two daughters that love to ride these great little bikes with me, so I understand your excitement about this project. Scott

I would leave it as is and not have to worry about it. Scott

cjpayne can you post up a picture of your GS, I had a 69 GS 400 4 speed years back, sure love the torque of the buicks. Scott

Try sliding the triple tree down each fork individually, if you have a fitment problem you will find out which one and where. Scott

Scooter all the tanks that I have are straight. Yours is bent. I had one that was slightly bent, I put a piece of steel shafting into it and gave it a slight tweak. Scott