Search results

A friend who was in to CT70s had to move out of the country and knew that I was in to CTs and said sell them for what I can get out of them. The more you bundle the more you will save! I am not looking to make a killing or anything, especially since I didnt pay for these. Most of these are not...

Some family stuff has come up and some extra money would be nice for the situation we are in. So regretfully I'm posting this. I'll post it here and craigslist before ebay or a part out...which I hope not to do. Quick rundown: 4 speed runs great and shifts great. Frame is titled in my name...

My hko has an issue with the ignition key...meaning I have been on more than a short walk retracing my path to look for my key after it vibrated out of the ignition cylinder. I'm sure anything from a screw driver to a paper clip or a penny would turn the ignition switch as well...so is it...

Bought this and hoped it would fit my CT KOH, it did but the handlebars are too long to snug in...so its back for sale. $25 shipped and its yours! Better for a rider not a resto or showroom bike.

Didn't want to spend a ton on a top plate for my koh ct so I sourced a z50 top plate...it fits but not the handle bars! Gosh! Now I need to sell this one again! It does fit though, lot of misinformation out there on these top plates and whether or not they interchange. The Z50 top plate does...

I have been sorting out my wiring harness on my KOH and I am a little stuck. I have all the wires connected except for battery (which are taped off since PO cut the ends off, and the rectifier along with the lights and such which are also not plugged in. Bike runs and all that is groovy, however...

I think I am going to go lifan and the custom route on my hko project bike as the engine is not the original one to the bike I will be selling it off. This bike is a great candidate for someone who wants to do a full resto on a bike, I don't have the space, or pockets for it now. If someone...

Starting a lot of topics lately haha...guess that happens when I can't work on the bike because of rain and I am inside. Anyways...in one of the bolt holes where the engine guard bolts to the neck of the bike it is missing or stripped. There is also one on the chain guard that is stripped, that...

I dont have any current issues with my setup right now, bike runs good and strong. My dilemma is I havent seen too many replacement parts for the Mitsubishi version flywheel in case i would need to make repairs in the future. I know there are two different kinds of stators for the 4 speed bikes...

My KO has a cracked handlebar holder so my left handlebar is loose. I need to replace the top piece, will only a KO top plate work or can I use a two piece top plate with handle bar bolt on clamp? Just not in the mood to spend 80 bucks on that top plate right now...

I dont have the tools/skill to fix this pipe so Im offering here for sale. Will come with all the heat shields, half moonie collars, and the hardware etc. Could be easily fixed with someone with the tools. PM an offer including shipping and we can work out a deal.

What is a "good way" to repair this: This is of course is on the typical spot under the asbestos clamp. I am going to grind down the bubble gum weld that the previous owner used to attach the bracket to. But what is a reasonable fix for this? I dont want it horrendously ugly, but needs to be...

I like to tell stories so if you are into pics only just scroll down :) Well its been close to a year I think and I finally was able to pick up another CT70 to replace my DAX 70 I had from last summer. I have always loved the CT / Dax bikes since riding on a friends bike a couple years ago and...

I am picking up an ATC 70 tomorrow to part out and wondering if there are any good parts that would cross over to the CT70? How similiar are these engines? Its a 3 speed auto clutch.

Sold the Dax today, got full asking price for it. I just couldnt bring myself to mod it and didnt have the cash for a restore so I passed it along to someone who will. Didnt want to mess up a good bike haha. So its gone and I am on the hunt again for a bike, maybe an ATC or an Odyssey :) Sad...

My Dax kick stand was a little loose so I thought I needed to change the spring on it and thought no big deal right. Well after taking it off the do my clutch the other day the pivot holes that the center stand swings on are bigger than the actual center kick stand. Ill snap a pic of it, pretty...

I actually never used the quick disconnect front on my bike until yesterday when I was bored haha. Takes about 30 seconds to take it apart as you see in the pics. So its not just a different triple tree it has no rear brake lever or cable because you cant disconnect that easily, drop down...

I always knew there was a difference between original parts and the cheaper China versions but now I know from experience! A friend of mine asked me to watch her CT70 that she bought from someone I know for a couple of months and winterize it for her, it was shiny and had all these new Chinese...

My stock carb is leaking so much fuel since yesterday I am ready to do something about it. Do I replace the carb with something like this: RH Choke Keihin PB 19mm Carb Honda CRF Ct 70 ATC ATV 2 | eBay Or even better I think: Honda Ct 70 CT70K1 Trail Carb Carburetor New | eBay Or do I just buy...

I have a 1969 honda Dax st70, I like the bike but prefer the ct trail parts more. Wanting to trade the front fender for a ct chrome fender in good shape and the chrome engine guard preferably with spark plug guard, mine is in good shape minus the fading white stripe on the front but chrome is...