Forums
New posts
Search forums
What's new
New posts
New profile posts
Latest activity
Members
Registered members
Current visitors
New profile posts
Search profile posts
Donations
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
General Minitrail Talk
Modifications
Adding a LED to an aftermarket large housing.
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Deoodles" data-source="post: 184086" data-attributes="member: 8270"><p>Last night I went out. Low beam on my led HL is better than high beam with an incandescent bulb. Battery fed it was bright at idle and didn’t get brighter at rpm. On high beam it had a flicker and brightness varied for no reason. A steady 5k rpm and it varied in brightness and flickered. I didn’t expect that so I decided to ask for advice here. That meant doing things I probably wouldn’t want to like verifying my stator and having access to the stator plug un plugged. Today I did the necessary required work. Please ask any questions. The wiring to the regulator may be wrong for all I know. The bike runs with the reg unplugged. I have a charge rate of 12.5 v at the Battery. I want battery fed led and no flicker. My schematic is correct. I did move the TL to dc from the battery. I installed 2 molex connectors in the HL bucket so I can plug the HL source from ac to dc quickly. The bulb is 18w</p><p></p><p>[ATTACH]64084[/ATTACH] [ATTACH]64085[/ATTACH] [ATTACH]64086[/ATTACH] [ATTACH]64081[/ATTACH] [ATTACH]64082[/ATTACH] [ATTACH]64083[/ATTACH]</p></blockquote><p></p>
[QUOTE="Deoodles, post: 184086, member: 8270"] Last night I went out. Low beam on my led HL is better than high beam with an incandescent bulb. Battery fed it was bright at idle and didn’t get brighter at rpm. On high beam it had a flicker and brightness varied for no reason. A steady 5k rpm and it varied in brightness and flickered. I didn’t expect that so I decided to ask for advice here. That meant doing things I probably wouldn’t want to like verifying my stator and having access to the stator plug un plugged. Today I did the necessary required work. Please ask any questions. The wiring to the regulator may be wrong for all I know. The bike runs with the reg unplugged. I have a charge rate of 12.5 v at the Battery. I want battery fed led and no flicker. My schematic is correct. I did move the TL to dc from the battery. I installed 2 molex connectors in the HL bucket so I can plug the HL source from ac to dc quickly. The bulb is 18w [ATTACH]64084[/ATTACH] [ATTACH]64085[/ATTACH] [ATTACH]64086[/ATTACH] [ATTACH]64081[/ATTACH] [ATTACH]64082[/ATTACH] [ATTACH]64083[/ATTACH] [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
General Minitrail Talk
Modifications
Adding a LED to an aftermarket large housing.
Top