Forums
New posts
Search forums
What's new
New posts
New profile posts
Latest activity
Members
Registered members
Current visitors
New profile posts
Search profile posts
Donations
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
General Minitrail Talk
Tech Area
CT70 runs, won't idle?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="mk2davis" data-source="post: 170583" data-attributes="member: 10329"><p>The idle speed screw is all the way. It started about 2 turns out, but any position has zero effect. The pilot air bleed starts at 1.5 turns out, and that can usually get me in the neighborhood, but again no effect.</p><p></p><p>I did find one thing that has an effect. Through my troubleshooting, I have no spark. I had spark, but no longer. If I pull the spark plug away from the engine an eighth of an inch while turning over, I get spark. So I tested the secondary side of the coil, 11.5k ohms. Isn't spec (both of these reading with the spark plug boot) supposed to be 19k+/-? It's a new coil, too. Bummer. I'm going to swap in another coil, and see what she do.</p><p></p><p>If someone can tell me how rpms effect resistance in a coil, I'd love to hear it.</p></blockquote><p></p>
[QUOTE="mk2davis, post: 170583, member: 10329"] The idle speed screw is all the way. It started about 2 turns out, but any position has zero effect. The pilot air bleed starts at 1.5 turns out, and that can usually get me in the neighborhood, but again no effect. I did find one thing that has an effect. Through my troubleshooting, I have no spark. I had spark, but no longer. If I pull the spark plug away from the engine an eighth of an inch while turning over, I get spark. So I tested the secondary side of the coil, 11.5k ohms. Isn't spec (both of these reading with the spark plug boot) supposed to be 19k+/-? It's a new coil, too. Bummer. I'm going to swap in another coil, and see what she do. If someone can tell me how rpms effect resistance in a coil, I'd love to hear it. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
General Minitrail Talk
Tech Area
CT70 runs, won't idle?
Top