Decal removal

[MikeyGNYC]

Did anyone put on honda trail 70 side decals then decide they don't look centered ?. Can I spray them and take them off and reuse them ?.

 

[JHminitrails]

Are you talking about the main frame decals or the triangle side badges below the seat? Removing the main frame decals without destroying them or stretching them out of shape will be near impossible I think. But the side badges are easy to remove if they are the original aluminum badges. Use 50lb test braided fishing line, like powerpro braid. Cut a length about 3 feet or so and wrap it around your fingers, then slip it under the corner of the aluminum badge, then using a downward sawing motion, work your way through the adhesive. Then you can re-apply some adhesive and re-install them. Not sure if you've replaced your side badges with reproductions made from just decal material, but this method wouldn't work for that. But removing those decals if you just put them on might be possible as they are fairly small and easier to work with. If you do try it, warm up the inside of the frame with a heat gun where the badge area is, this will prevent melting the decal from heating the decal itself on the outside. Don't get it cooking hot, but just fairly warm.