Forums
New posts
Search forums
What's new
New posts
New profile posts
Latest activity
Members
Registered members
Current visitors
New profile posts
Search profile posts
Donations
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
General Minitrail Talk
Tech Area
S 90 grinding into 2nd gear
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="red69" data-source="post: 181753" data-attributes="member: 9052"><p>It may be the throttle slide sticking. I've had that happen with mine. There was a fix by Honda years ago on the Mikuni carb. It consisted of a slide that had a slightly smaller diameter (.02 mm-.03 mm) than the stock piece. If you have this carb, back off one of the mounting nuts on the carb flange a fairly small amount to see if it frees the slide. What I think happens is that uneven torque at the mounting point may distort the slide barrel.</p><p></p><p>If course if you have a Keihin, this will not apply and your problem may be with the throttle grip assembly. You will have to disassemble it to see if all is correct. Use some Lubriplate grease on assembly.</p></blockquote><p></p>
[QUOTE="red69, post: 181753, member: 9052"] It may be the throttle slide sticking. I've had that happen with mine. There was a fix by Honda years ago on the Mikuni carb. It consisted of a slide that had a slightly smaller diameter (.02 mm-.03 mm) than the stock piece. If you have this carb, back off one of the mounting nuts on the carb flange a fairly small amount to see if it frees the slide. What I think happens is that uneven torque at the mounting point may distort the slide barrel. If course if you have a Keihin, this will not apply and your problem may be with the throttle grip assembly. You will have to disassemble it to see if all is correct. Use some Lubriplate grease on assembly. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
General Minitrail Talk
Tech Area
S 90 grinding into 2nd gear
Top