I split the cases on a K2 motor and the main bearings were easy to get out of the cases. It looks like they may have been turning in the races.
I removed the crank with the bearings on it as well as the cam sprocket.
Is this motor toast?
How do you get the cam sprocket and main bearings off...
I just purchased a ST90 with 6400 miles on the clock. The bike appears to have been well-taken care of over its life. I got it running again, but it has quite a clackety noise coming from what I believe is the cam chain. I attempted to tension the chain via the bottom bolt cover/threaded rod...
I have a bit of clacking at low RPM on my CT70 (K0). I went to adjust the cam chain tensioner by removing the sealing bolt so I could get at the tensioner adjusting bolt. Removing the bolt, the spring fell out. I assume that the tensioner adjusting bolt is missing. I couldn't get to a good...