Finally, my 140cc lives!!

C

chuckklr04

Member
dsrt4 said:
This is what you need on the Bottom of the engine to put Oil into the head and from there on to go into the cooler.

Pic is from Tbolt the Link to the 140cc Iron bore is below the pic.

140jumper.jpg
TBolt USA, LLC » Engines » Lifan 50-150 Engines » LIFAN 140cc

Here is how I Have my Cooler hooked up with the ELCHEAPO Cooler. This isnt my Bike..

awww.hotkey.net.au__rio_dirtbike_images_Nitrous140M_Part2.jpg
Click to expand...

Is that the best way to do it?

You would think that cooler oil going straight into the head would be better.
 
D

dsrt4

Member
chuckklr04 said:
Is that the best way to do it?

You would think that cooler oil going straight into the head would be better.
Click to expand...

The Problem is if you dont jump it like that or run a cooler to those bolts the head doesn't get oil.........

You can use the jumper and then go with a cooler going into the head.
Either way... You have to have something connecting those two oil passages at the bottom.
 
Last edited:
C

chuckklr04

Member
Well shit!


I put about 50 miles on it without the cooler or jump hose.

Did put one on this weekend.

Hopefully the head is fine.

Seems to me that it would come from the factory with a cooler or jump hose.
 
Top