putting a auto clutch on a H model?

kirrbby

Well-Known Member
You should just have to swap the complete clutch, the shift shaft, and the side cover...including the clutch release bits. I think that's all.

Make sure the big primary gear has the correct tooth count to match the small primary gear...and the clutch itself....
If the new clutch uses the same small primary gear as the old clutch, you're all set. If it uses a different small gear...you'll have to swap the big gear to match.

You could also just bolt a semi-auto engine onto your bike and put the H engine on the shelf...if you can find a running engine...it might be a better investment...and less work.

 
Last edited:
As an eBay Associate we earn from qualifying purchases.

kirrbby

Well-Known Member


 
As an eBay Associate we earn from qualifying purchases.

OLD CT

Well-Known Member
You can do it. I agree with Kirb, it would be better/quicker/cheaper to shelf the engine, as it's more valuable un touched.
Here is a 4 down 4 speed big bore auto clutch build.

IMG_1878.jpg
 
Top