Replacing gears and finding oem parts

B

blackjacklambert

New Member
Hi everyone, I have opened the case on the transmission, the teeth on two of the gears are broken off, think it is second gear? How do the gears come off, there is a bracket it seems holding them on by a phillips screw on the other side. It that it? Also where can one order oem replacment gears for it? I looked on Dr.ATV but it didn't seem they had the parts.
 
B

blackjacklambert

New Member
No sorry don't know how to change that below name yet. It is a Honda trail CT70H and I don't know if K1 or K2 ? Someone said K1. Manufacture date is 4/72, So K2 is 72? The vin # is short so the Honda shop coulldn't tell me anything. How do you find out?
 
OLD CT

OLD CT

Well-Known Member
Jack,you cant change that.the 50cc under your screen name changes whan you post more.it just means your a newbie.you have a 72H K1.no such thing as a K2H.
 
Last edited:
ctbale

ctbale

Member
I have a few trannys that are apart, go to cheap cycle parts and figure out what part numbers you need, let me know, If I have them, you can have them for $5 (thats what a usps small flat rate box costs) I wont be back to my home till weds so take your time. And how may teeth? 17 and 31 ? page 28 in the shop manual shows it pretty good. I usually leave the crank, tranny and shift drum in the LH case. I pull the shift pawl out and star off the drum. I think thats the #3 Phillips screw your seeing. maybe someone else will chime in on if they leave the tranny in the RH case.
 
Last edited:
Top