Search results

So just picked up a k0 ct70. Started it up with a few tune up things ride it around ok. Today started it and the headlight went off. Speedo lights still work. Checked the fuse its blown. Ive now blown 3 fuses. The PO I guess lost the key and you can turn the ignition with a screwdriver...

On my k3 with piranha engine, with the wires all booked up (one yellow grounded, and one yellow split between the yellow on DRATV harness, white on DRATV harness, and yellow of rectifier from DRATV) my head light now works when the battery is on but engine is not running. I know my stock ct70...

So I was all into the idea of using the dratv 6v conversion regulator rectifier so that I could keep all my lights and battery 6v. I did this for a variety of reasons one being relative ease and having a smaller battery as I didn't want a big huge 12v battery wedged down in the small frame. So...

The original ct70 carb set up I believe is gravity fed where the carb sits lower than the fuel tank and gas flows down. However which my pirahna 140 set up the carb gas inlet sits higher (as does the overall carb) and I have my two into one petcock/fuel stop mounted to the bolt hole that would...

I am looking to put some new tires on my stock rims for the bike with the piranha 140. I am exploring many different options for instance sticking with a 3.5 x 10 tire such as the thinking 421 for off road use, the Kenda k329 3.5 x 10 for street use, or getting a dual purpose tire like the...

Does anyone have a wiring diagram for the 12v webllc harness? I am trying to put that and a pirahna 140 it into a 1975 k3 model ct70 with turn signals, kill switch etc and I would like to keep all stock controls etc. I have a decent amount of it hooked up but I am missing some for sure like...

So I bought a Honda z50 1978 for cheaper than a normal visit to the grocery store because the fenders were mangled and it was stuck in gear. I was able to push start it and get it running again when I got it home and then was able to get it into neutral and out of 3rd gear. Well now it is...

Looking for a soft tail z50 air filter and headlight switch (or does the hard tail hi low switch work on soft tail models?). Thanks.

I had to go see this one and glad I did because now it sleeps in my garage. Got it from original owner with warranty card, tool kit, two original keys, and letter from Honda about the mso. I even saw a picture of her on it in 1970 heh. It's whole and complete, paint is very very good, and no...

So I moved from AZ to MD this summer and I had a few bikes in the shed. I noticed today that small little specks of yellow that don't wipe out with chrome polish are appearing on the chrome. What is happening here? Is this due to humidity? And if so how do you combat this? I mean you all...

http://www.ebay.com/itm/152681835626?item=152681835626&viewitem=&vxp=mtr So I think I am going to do my first mod ct70 to get it a little more comfortable on the road. Thinking about putting it on a 1977 ct70. It looks like the above kit is pretty inclusive. Will I still need the wiring...

I just got a ct70 k1 and trying to put it all back together. I am having some questions about the wiring especially coming out of the speedo. I have 6 wires coming out of the speedo and in ( ) I have where I currently have it plugged into: 1. Green -> Green (Harness) 2. Green -> ?????? 3...

So I just got a CL175 and put new plugs, new battery, new fuel lines and it fired right up. Now the plugs I got were DR8HA (resistor) instead of the recommended D8HA. The guy at the shop said it wouldnt matter if it was a resistor plug or not. So I got them. Then I was out riding this...

Looking to buy a k1 z50 preferably a non runner or project to do with my daughter to put with my k0 and k2. Pm me for my number or just respond with pics and or info. Thanks

Looking for long rear fender maybe a brake pedal l and r handlebars. Also may be in the market for a k0 seat\seat cover. Thanks

My new Honda z50 k0. Needs new seat or cover that is compatible with k0 features and exhaust guard. All else is there thanks to Kirby supplying the levers. Gas tank has some rust spots and minor pin holes. Not sure if I want to restore or sit as is. I would restore it back to Honda specs so...

On my ST70 I have some electrical questions. 1. My headlight and taillight do not work. The switch that goes from Hi to Low is broken off, not the module itself but the switch that you would use to change if from hi to low beam (the actual lever is broken not the housing). Would the actual...

Two K3 bikes for sale... not sure if I want to pull the trigger as he wants $3400 for the pair. I like the k3 bikes but... Im not sure I like them this much. Chain guard on the blue one is not the right color and has scratches etc on the bike. The orange one is all good except for one side...

The shifter/clutch on an HKO is a little stiff. I can shift through the gears but it can be a little more effort than it should sometimes. I am going to play with the clutch nut some thins weekend on the right side of the case and hope that fixes it. Any other suggestions or tips on what to...

Is there one?? I cant find any ST70 under the nada guide value. That is what I use when sending in my registration to VT.