EXPIRED Clearing out my CT70 stuff. Lots and lots of parts. Pink frame, bars, new motor parts

mips

mips

Member
Update:

Here are some prices and photos:

New Connecting Rod and crank bearings for CT70
$20 shipped

CT70 coils. One is a new 12v CDI style from DrATV. All (except one) will go for $15 shipped.
IMG_0213.png

CT70 brand new kickstarter shaft, plus extra kickstarter parts! Two used gears, a return spring, plus the retainer Only $20 SHIPPED. (no picture)

Misc cables, one of these speedo cables is gone though. A couple are new.
IMG_0194.png

Kickstarter leg from dratv. Not the assembly next to it, only the painted black kickstare leg. New $10 shipped
IMG_0195.jpg

Gas tank. you'll probably want to line it. Came out of a k1. ($20 shipped)
IMG_0225.png

Handlebar party! All these parts for $40 shipped. Two k0 bar mounts, two handlebar knobs, one bar mount off I don't know what ...but hey it's new! and two right handlebars.
IMG_0312.png
IMG_0311.png
 
Last edited:
mips

mips

Member
Mas photos

IMG_0196.png
IMG_0192.png
IMG_0234.png
IMG_0232.png
IMG_0230.png
IMG_0229.png
IMG_0227.png

This motor goes with the pink bike. New rings, oem honda piston, etc
IMG_0226.png

New valves, tranny bearings, cam chain, etc.
IMG_0218.jpg
IMG_0210.png
parts from the pink bike
IMG_0207.png
 
J.P.

J.P.

Member
Holy cow. If I would have known you had that much spares. I could have avoiding buying the second bike. I'll probably still need some parts though.
 
J.P.

J.P.

Member
A set of straight rear shock cans(attached to shocks is fine.)
A set of bars.
Two flywheel covers with inspection hole.
Two covers for those holes.
One rim halve(I don't recall which side.)
A seat with good foam to be recovered.


Runnable condition; most of it will get powdercoated.
 
S

st50.dk

Member
Hello mips.
I'm interested in your sparkplug-covers. Only problem is, I live in Denmark - would you consider shipping one of those to Denmark ?
 
mips

mips

Member
st50.dk. I'd love to ship to denmark and have been in a similar situation before. I've unfortunately had bad experiences the last three times I sent international, and am reluctant to do it again. Very sorry.
 
mips

mips

Member
JP
You are in OK right? You're welcome to come check it out.
I paid to have each rim sandblasted and powdercoated -- would like to get what I have in them at $30 per wheel.
One seat is really good, it is from a k1. THe other would need new foam and has been welded. The good one, which if I remember right has a decent cover on it ($60) and $10 for the welded one.
Straight good shocks -- 15 for a set. I have nice chrome powdercoated springs and brand new chrome shock covers as well.
Most of the covers have chips in them near chain gaurd. $10 a piece.
 
J.P.

J.P.

Member
Yeah, I'm in OKC.

Do you have straight set of bars? How much?
How much on rotor covers?
I don't need perfect shock covers mine are just blashed on the muffler side and half rusted away.

I'm kind of looking to get a budget number together before I come to shopping. I really bought the second bike to get the parts I needed for the first one, but do want to build the second for the second at some point.
 
mips

mips

Member
Maybe I'm off base here -- but I think $225 would be a fair price for the complete frame setup. I have a little over $100 into the powdercoating alone and another $30 or so for those dratv shock covers.
I'd include new swingarm bushings and the rest of the frame (swingarm, front forks if you want them, chain guard, and fork covers). I have the matching motor for it as well. I'd throw that in for $75 (I just finished soda blasting the cases), or a little more and include most everything you need to fully rebuild it (new oem piston, rings, new valves, gaskets, tranny and crankshaft bearings and connecting rod).

If it's something someone was planning to resell, I think one could make some serious $$$$$ on ebay for the novelty factor. I planned on doing it, but I've been putting off other projects for too long.
 
mips

mips

Member
If I don't have to ship it, $5 for rotor covers. $10 otherwise. I think most of them have a chip in them near the chain guard.
I have mostly right handlebars (4 I think). Only one "set" and pretty straight. I'd say $40??

Cjpayne bought my wheels, muffler cover, a stator, and all my full shocks. I do have those new chrome shock covers. I think they are the ones that are a little longer than stock. I'd take $12 for the set of those.
 
cjpayne

cjpayne

Well-Known Member
Damn that cjpayne!!! And he'll be going back for a few more items. Better hurry. Actually he left a few powdercoated rims. They look nice.
 
Last edited:
kirrbby

kirrbby

Well-Known Member
mips said:
Maybe I'm off base here -- but I think $225 would be a fair price for the complete frame setup. I have a little over $100 into the powdercoating alone and another $30 or so for those dratv shock covers.
I'd include new swingarm bushings and the rest of the frame (swingarm, front forks if you want them, chain guard, and fork covers). I have the matching motor for it as well. I'd throw that in for $75 (I just finished soda blasting the cases), or a little more and include most everything you need to fully rebuild it (new oem piston, rings, new valves, gaskets, tranny and crankshaft bearings and connecting rod).

If it's something someone was planning to resell, I think one could make some serious $$$$$ on ebay for the novelty factor. I planned on doing it, but I've been putting off other projects for too long.
Click to expand...
That sounds very reasonable to me.
 
S

st50.dk

Member
Hello mips.
Of course I understand your concern, regarding international shipping. Anyway if you change your mind, I'll be willing to pay in advance or by pay-pal (sparkplug-cover)

Best regards
st50.dk
 
mips

mips

Member
St50,
for some reason I had thought you were looking for a stator cover. I don't have a spare good spark plug cover, sorry.

The reason I was reluctant is that one part I returned to cmsnl (which is in the netherlands I think), got lost in transit. Out $100. Then the pain in I had filling out all the customs forms and going to the post office to send something (twice) to the thailand recently. Have you tried cmsnl?
 
OLD CT

OLD CT

Well-Known Member
Hi mips,yes i have bought from them,parts came quick.I never returned anything so that's where there is a potential for trouble.Doesnt help now as hindsight is 20/20 but if i had trouble and order wrong,offering it here brings great results as you are having.They have some good deals but only if you buy in bulk.As the shipping is high and prices are in euros.You have a good point about having st50 check them out.
 
Top