Cracked block

zack_novak

zack_novak

Member
Well I dont really know how to start... But today I found a decent crack in the engine block near the drain bolt. It has a 88cc big bore and a couple upgrades. Basically it wont hold oil and I dont know the options I have.

I didnt want to buy an engine for $300. Plus then I would have to swap all the parts over. And I will have to find a block from a 4 speed.

Anybody have other options for what I should do? Thanks
 
OLD CT

OLD CT

Well-Known Member
Zack,It's only the right side case that needs to be replaced.Their about 35 shipped for a good used one.If you dont want to do it yourself and would like to send it out P.M.me.It would be a good time to upgrade to a 110cc.
 
kirrbby

kirrbby

Well-Known Member
figure out which case is cracked, right or left side. you can buy them used for $25 or so. doesn't have to be a 4 speed case they are pretty much all the same.
 
zack_novak

zack_novak

Member
It is the right side. And CT, where are you located? I already did the 88 big bore kit but I have never split the cases before. I would need to do the shift drum and/or forks while i'm in there too.
 
Top